Fri Nov 5 15:05:45 UTC 2021 I: starting to build libpdf-reuse-barcode-perl/bullseye/amd64 on jenkins on '2021-11-05 15:05' Fri Nov 5 15:05:45 UTC 2021 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/amd64_15/87058/console.log Fri Nov 5 15:05:45 UTC 2021 I: Downloading source for bullseye/libpdf-reuse-barcode-perl=0.07-1.1 --2021-11-05 15:05:45-- http://cdn-fastly.deb.debian.org/debian/pool/main/libp/libpdf-reuse-barcode-perl/libpdf-reuse-barcode-perl_0.07-1.1.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2299 (2.2K) Saving to: ‘libpdf-reuse-barcode-perl_0.07-1.1.dsc’ 0K .. 100% 132M=0s 2021-11-05 15:05:45 (132 MB/s) - ‘libpdf-reuse-barcode-perl_0.07-1.1.dsc’ saved [2299/2299] Fri Nov 5 15:05:45 UTC 2021 I: libpdf-reuse-barcode-perl_0.07-1.1.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libpdf-reuse-barcode-perl Binary: libpdf-reuse-barcode-perl Architecture: all Version: 0.07-1.1 Maintainer: Debian Perl Group Uploaders: Vincent Danjean Homepage: https://metacpan.org/release/PDF-Reuse-Barcode Standards-Version: 3.9.6 Vcs-Browser: https://anonscm.debian.org/cgit/pkg-perl/packages/libpdf-reuse-barcode-perl.git Vcs-Git: git://anonscm.debian.org/pkg-perl/packages/libpdf-reuse-barcode-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: cdbs (>= 0.4.27), debhelper (>= 9~), patchutils (>= 0.2.25) Build-Depends-Indep: libbarcode-code128-perl, libgd-barcode-perl, libpdf-reuse-perl, perl (>= 5.8.8-7) Package-List: libpdf-reuse-barcode-perl deb perl optional arch=all Checksums-Sha1: f25c91d0ae634915446829e35d3118d825326b4f 8319 libpdf-reuse-barcode-perl_0.07.orig.tar.gz d54355643dcb50d83da75efee7f0dc1d8c6ba9b1 2864 libpdf-reuse-barcode-perl_0.07-1.1.debian.tar.xz Checksums-Sha256: dfef171e3942bb1bc702c4314efe3f5c888aa67ffeeb9555a54eaabaada2a345 8319 libpdf-reuse-barcode-perl_0.07.orig.tar.gz ff7d6285f24a0dc58af0901044f041a334c7698a5cdddcd5889d4070319d8711 2864 libpdf-reuse-barcode-perl_0.07-1.1.debian.tar.xz Files: 05bbc7a9d6eb8f1c187548ed5d4bb88a 8319 libpdf-reuse-barcode-perl_0.07.orig.tar.gz a10804821aa1c8ccf5495ec4431387fd 2864 libpdf-reuse-barcode-perl_0.07-1.1.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEuL9UE3sJ01zwJv6dCRq4VgaaqhwFAl/xuRYACgkQCRq4Vgaa qhwPFg/8CrzrhzPkl09bkfsJKMWrsoGUHN/Ts3OgOmDJmZwi5P0qAdCtDUVF9Lix RtgcajLnoTXfO7Mr+k932p7VUBhYBKPRCECPvsRUR2Yi/Jswo3vCFM+yqodGJB1p UqTevWypl0RCl1s9Ac26/UztOI8wfJK+5XYLWdXkoto+/Xnx1hucW3n5pxM5Qv0C 2Oa/LkqY90vovb+8UaDlQdinq4GnG9QtnmSnVKX+Hj+NcCOxd4rMlAToD8+xpaFt iI/y819qklKjRHr0MP2rjhcf0lvbMtCqx91EmY9/5TbMYNUq5Eq9IGHHe2JckbPC DqbFP/zZyh3mfD+ANPQpPoqXREL/U4V1t1J9S6VDdw9OxNHfbwWdTeiO7AbyXiEo bkl4JA+Rhx7a4b4tK35UDAhbJxd5ynF7FjzTdoaozNtrBALJr6EnBJq5YoifftuU ILD4iSETWWKsohRV6QmN3zjiXmpL+rM3i+cbauhhfHzLEF/WGb9lXVaXvddv2hPt 6QtFNTx2jazW3fpddHYZ+hgqf/JQN6bx/IvkgNa1fiQ6Pym7rKcujkQPSRkk2Eru VOtpfsui10qYdmgVMffF/SmsYj4JfA1VhiS+D45tU+UoZo9o9jisLeQbSA9DW9TC KsmXxbU15BULpMave5r+tuY3RsvapAtATwlS5KUGBhIE3+pk2gg= =aS8I -----END PGP SIGNATURE----- Fri Nov 5 15:05:45 UTC 2021 I: Checking whether the package is not for us Fri Nov 5 15:05:45 UTC 2021 I: Starting 1st build on remote node ionos11-amd64.debian.net. Fri Nov 5 15:05:45 UTC 2021 I: Preparing to do remote build '1' on ionos11-amd64.debian.net. Fri Nov 5 15:06:53 UTC 2021 I: Deleting $TMPDIR on ionos11-amd64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Fri Nov 5 03:05:47 -12 2021 I: pbuilder-time-stamp: 1636124747 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libpdf-reuse-barcode-perl_0.07-1.1.dsc] I: copying [./libpdf-reuse-barcode-perl_0.07.orig.tar.gz] I: copying [./libpdf-reuse-barcode-perl_0.07-1.1.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.Y6NlxY3w/trustedkeys.kbx': General error gpgv: Signature made Sun Jan 3 00:31:18 2021 -12 gpgv: using RSA key B8BF54137B09D35CF026FE9D091AB856069AAA1C gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./libpdf-reuse-barcode-perl_0.07-1.1.dsc dpkg-source: info: extracting libpdf-reuse-barcode-perl in libpdf-reuse-barcode-perl-0.07 dpkg-source: info: unpacking libpdf-reuse-barcode-perl_0.07.orig.tar.gz dpkg-source: info: unpacking libpdf-reuse-barcode-perl_0.07-1.1.debian.tar.xz I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/3892069/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='amd64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=15' DISTRIBUTION='' HOME='/root' HOST_ARCH='amd64' IFS=' ' INVOCATION_ID='9ab88a15115b4257bb7fdc19b824d8ea' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='3892069' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.qNXNPl3olG/pbuilderrc_9tY0 --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.qNXNPl3olG/b1 --logfile b1/build.log libpdf-reuse-barcode-perl_0.07-1.1.dsc' SUDO_GID='111' SUDO_UID='106' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' _='/usr/bin/systemd-run' http_proxy='http://78.137.99.97:3128' I: uname -a Linux ionos11-amd64 5.10.0-9-amd64 #1 SMP Debian 5.10.70-1 (2021-09-30) x86_64 GNU/Linux I: ls -l /bin total 5476 -rwxr-xr-x 1 root root 1234376 Aug 4 08:25 bash -rwxr-xr-x 3 root root 38984 Jul 20 2020 bunzip2 -rwxr-xr-x 3 root root 38984 Jul 20 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 20 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 20 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 20 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 4 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 20 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 20 2020 bzgrep -rwxr-xr-x 3 root root 38984 Jul 20 2020 bzip2 -rwxr-xr-x 1 root root 18424 Jul 20 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 20 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 20 2020 bzmore -rwxr-xr-x 1 root root 43936 Sep 23 2020 cat -rwxr-xr-x 1 root root 72672 Sep 23 2020 chgrp -rwxr-xr-x 1 root root 64448 Sep 23 2020 chmod -rwxr-xr-x 1 root root 72672 Sep 23 2020 chown -rwxr-xr-x 1 root root 151168 Sep 23 2020 cp -rwxr-xr-x 1 root root 125560 Dec 10 2020 dash -rwxr-xr-x 1 root root 113664 Sep 23 2020 date -rwxr-xr-x 1 root root 80968 Sep 23 2020 dd -rwxr-xr-x 1 root root 93936 Sep 23 2020 df -rwxr-xr-x 1 root root 147176 Sep 23 2020 dir -rwxr-xr-x 1 root root 84440 Jul 28 07:09 dmesg lrwxrwxrwx 1 root root 8 Nov 6 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 6 2019 domainname -> hostname -rwxr-xr-x 1 root root 39712 Sep 23 2020 echo -rwxr-xr-x 1 root root 28 Nov 9 2020 egrep -rwxr-xr-x 1 root root 39680 Sep 23 2020 false -rwxr-xr-x 1 root root 28 Nov 9 2020 fgrep -rwxr-xr-x 1 root root 69032 Jul 28 07:09 findmnt -rwsr-xr-x 1 root root 34896 Feb 26 2021 fusermount -rwxr-xr-x 1 root root 203072 Nov 9 2020 grep -rwxr-xr-x 2 root root 2346 Mar 2 2021 gunzip -rwxr-xr-x 1 root root 6376 Mar 2 2021 gzexe -rwxr-xr-x 1 root root 98048 Mar 2 2021 gzip -rwxr-xr-x 1 root root 22600 Nov 6 2019 hostname -rwxr-xr-x 1 root root 72840 Sep 23 2020 ln -rwxr-xr-x 1 root root 56952 Feb 7 2020 login -rwxr-xr-x 1 root root 147176 Sep 23 2020 ls -rwxr-xr-x 1 root root 149736 Jul 28 07:09 lsblk -rwxr-xr-x 1 root root 85184 Sep 23 2020 mkdir -rwxr-xr-x 1 root root 76896 Sep 23 2020 mknod -rwxr-xr-x 1 root root 48064 Sep 23 2020 mktemp -rwxr-xr-x 1 root root 59632 Jul 28 07:09 more -rwsr-xr-x 1 root root 55528 Jul 28 07:09 mount -rwxr-xr-x 1 root root 18664 Jul 28 07:09 mountpoint -rwxr-xr-x 1 root root 147080 Sep 23 2020 mv lrwxrwxrwx 1 root root 8 Nov 6 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 18 2021 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 43872 Sep 23 2020 pwd lrwxrwxrwx 1 root root 4 Aug 4 08:25 rbash -> bash -rwxr-xr-x 1 root root 52032 Sep 23 2020 readlink -rwxr-xr-x 1 root root 72704 Sep 23 2020 rm -rwxr-xr-x 1 root root 52032 Sep 23 2020 rmdir -rwxr-xr-x 1 root root 27472 Sep 27 2020 run-parts -rwxr-xr-x 1 root root 122224 Dec 22 2018 sed lrwxrwxrwx 1 root root 4 Oct 20 23:41 sh -> dash -rwxr-xr-x 1 root root 43808 Sep 23 2020 sleep -rwxr-xr-x 1 root root 84928 Sep 23 2020 stty -rwsr-xr-x 1 root root 71912 Jul 28 07:09 su -rwxr-xr-x 1 root root 39744 Sep 23 2020 sync -rwxr-xr-x 1 root root 531928 Feb 16 2021 tar -rwxr-xr-x 1 root root 14456 Sep 27 2020 tempfile -rwxr-xr-x 1 root root 101408 Sep 23 2020 touch -rwxr-xr-x 1 root root 39680 Sep 23 2020 true -rwxr-xr-x 1 root root 14328 Feb 26 2021 ulockmgr_server -rwsr-xr-x 1 root root 35040 Jul 28 07:09 umount -rwxr-xr-x 1 root root 39744 Sep 23 2020 uname -rwxr-xr-x 2 root root 2346 Mar 2 2021 uncompress -rwxr-xr-x 1 root root 147176 Sep 23 2020 vdir -rwxr-xr-x 1 root root 63744 Jul 28 07:09 wdctl lrwxrwxrwx 1 root root 8 Nov 6 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 2 2021 zcat -rwxr-xr-x 1 root root 1678 Mar 2 2021 zcmp -rwxr-xr-x 1 root root 5880 Mar 2 2021 zdiff -rwxr-xr-x 1 root root 29 Mar 2 2021 zegrep -rwxr-xr-x 1 root root 29 Mar 2 2021 zfgrep -rwxr-xr-x 1 root root 2081 Mar 2 2021 zforce -rwxr-xr-x 1 root root 7585 Mar 2 2021 zgrep -rwxr-xr-x 1 root root 2206 Mar 2 2021 zless -rwxr-xr-x 1 root root 1842 Mar 2 2021 zmore -rwxr-xr-x 1 root root 4553 Mar 2 2021 znew I: user script /srv/workspace/pbuilder/3892069/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: amd64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: cdbs (>= 0.4.27), debhelper (>= 9~), patchutils (>= 0.2.25), libbarcode-code128-perl, libgd-barcode-perl, libpdf-reuse-perl, perl (>= 5.8.8-7) dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19655 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on cdbs (>= 0.4.27); however: Package cdbs is not installed. pbuilder-satisfydepends-dummy depends on debhelper (>= 9~); however: Package debhelper is not installed. pbuilder-satisfydepends-dummy depends on patchutils (>= 0.2.25); however: Package patchutils is not installed. pbuilder-satisfydepends-dummy depends on libbarcode-code128-perl; however: Package libbarcode-code128-perl is not installed. pbuilder-satisfydepends-dummy depends on libgd-barcode-perl; however: Package libgd-barcode-perl is not installed. pbuilder-satisfydepends-dummy depends on libpdf-reuse-perl; however: Package libpdf-reuse-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} cdbs{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} fontconfig-config{a} fonts-dejavu-core{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbarcode-code128-perl{a} libbrotli1{a} libbsd0{a} libdebhelper-perl{a} libdeflate0{a} libelf1{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libfontconfig1{a} libfreetype6{a} libgd-barcode-perl{a} libgd-perl{a} libgd3{a} libicu67{a} libjbig0{a} libjpeg62-turbo{a} libmagic-mgc{a} libmagic1{a} libmd0{a} libpdf-reuse-perl{a} libpipeline1{a} libpng16-16{a} libsigsegv2{a} libsub-override-perl{a} libtiff5{a} libtool{a} libuchardet0{a} libwebp6{a} libx11-6{a} libx11-data{a} libxau6{a} libxcb1{a} libxdmcp6{a} libxml2{a} libxpm4{a} m4{a} man-db{a} patchutils{a} po-debconf{a} sensible-utils{a} ucf{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libfont-ttf-perl libltdl-dev libmail-sendmail-perl libtext-pdf-perl lynx wget 0 packages upgraded, 59 newly installed, 0 to remove and 0 not upgraded. Need to get 24.4 MB of archives. After unpacking 93.6 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main amd64 bsdextrautils amd64 2.36.1-8 [145 kB] Get: 2 http://deb.debian.org/debian bullseye/main amd64 libuchardet0 amd64 0.0.7-1 [67.8 kB] Get: 3 http://deb.debian.org/debian bullseye/main amd64 groff-base amd64 1.22.4-6 [936 kB] Get: 4 http://deb.debian.org/debian bullseye/main amd64 libpipeline1 amd64 1.5.3-1 [34.3 kB] Get: 5 http://deb.debian.org/debian bullseye/main amd64 man-db amd64 2.9.4-2 [1354 kB] Get: 6 http://deb.debian.org/debian bullseye/main amd64 sensible-utils all 0.0.14 [14.8 kB] Get: 7 http://deb.debian.org/debian bullseye/main amd64 libmagic-mgc amd64 1:5.39-3 [273 kB] Get: 8 http://deb.debian.org/debian bullseye/main amd64 libmagic1 amd64 1:5.39-3 [126 kB] Get: 9 http://deb.debian.org/debian bullseye/main amd64 file amd64 1:5.39-3 [69.1 kB] Get: 10 http://deb.debian.org/debian bullseye/main amd64 gettext-base amd64 0.21-4 [175 kB] Get: 11 http://deb.debian.org/debian bullseye/main amd64 ucf all 3.0043 [74.0 kB] Get: 12 http://deb.debian.org/debian bullseye/main amd64 libsigsegv2 amd64 2.13-1 [34.8 kB] Get: 13 http://deb.debian.org/debian bullseye/main amd64 m4 amd64 1.4.18-5 [204 kB] Get: 14 http://deb.debian.org/debian bullseye/main amd64 autoconf all 2.69-14 [313 kB] Get: 15 http://deb.debian.org/debian bullseye/main amd64 autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 16 http://deb.debian.org/debian bullseye/main amd64 automake all 1:1.16.3-2 [814 kB] Get: 17 http://deb.debian.org/debian bullseye/main amd64 autopoint all 0.21-4 [510 kB] Get: 18 http://deb.debian.org/debian bullseye/main amd64 cdbs all 0.4.163 [82.6 kB] Get: 19 http://deb.debian.org/debian bullseye/main amd64 libdebhelper-perl all 13.3.4 [189 kB] Get: 20 http://deb.debian.org/debian bullseye/main amd64 libtool all 2.4.6-15 [513 kB] Get: 21 http://deb.debian.org/debian bullseye/main amd64 dh-autoreconf all 20 [17.1 kB] Get: 22 http://deb.debian.org/debian bullseye/main amd64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 23 http://deb.debian.org/debian bullseye/main amd64 libsub-override-perl all 0.09-2 [10.2 kB] Get: 24 http://deb.debian.org/debian bullseye/main amd64 libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 25 http://deb.debian.org/debian bullseye/main amd64 dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 26 http://deb.debian.org/debian bullseye/main amd64 libelf1 amd64 0.183-1 [165 kB] Get: 27 http://deb.debian.org/debian bullseye/main amd64 dwz amd64 0.13+20210201-1 [175 kB] Get: 28 http://deb.debian.org/debian bullseye/main amd64 libicu67 amd64 67.1-7 [8622 kB] Get: 29 http://deb.debian.org/debian bullseye/main amd64 libxml2 amd64 2.9.10+dfsg-6.7 [693 kB] Get: 30 http://deb.debian.org/debian bullseye/main amd64 gettext amd64 0.21-4 [1311 kB] Get: 31 http://deb.debian.org/debian bullseye/main amd64 intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 32 http://deb.debian.org/debian bullseye/main amd64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 33 http://deb.debian.org/debian bullseye/main amd64 debhelper all 13.3.4 [1049 kB] Get: 34 http://deb.debian.org/debian bullseye/main amd64 fonts-dejavu-core all 2.37-2 [1069 kB] Get: 35 http://deb.debian.org/debian bullseye/main amd64 fontconfig-config all 2.13.1-4.2 [281 kB] Get: 36 http://deb.debian.org/debian bullseye/main amd64 libbarcode-code128-perl all 2.21-2 [21.3 kB] Get: 37 http://deb.debian.org/debian bullseye/main amd64 libbrotli1 amd64 1.0.9-2+b2 [279 kB] Get: 38 http://deb.debian.org/debian bullseye/main amd64 libmd0 amd64 1.0.3-3 [28.0 kB] Get: 39 http://deb.debian.org/debian bullseye/main amd64 libbsd0 amd64 0.11.3-1 [108 kB] Get: 40 http://deb.debian.org/debian bullseye/main amd64 libdeflate0 amd64 1.7-1 [53.1 kB] Get: 41 http://deb.debian.org/debian bullseye/main amd64 libexpat1 amd64 2.2.10-2 [96.9 kB] Get: 42 http://deb.debian.org/debian bullseye/main amd64 libpng16-16 amd64 1.6.37-3 [294 kB] Get: 43 http://deb.debian.org/debian bullseye/main amd64 libfreetype6 amd64 2.10.4+dfsg-1 [418 kB] Get: 44 http://deb.debian.org/debian bullseye/main amd64 libfontconfig1 amd64 2.13.1-4.2 [347 kB] Get: 45 http://deb.debian.org/debian bullseye/main amd64 libjpeg62-turbo amd64 1:2.0.6-4 [151 kB] Get: 46 http://deb.debian.org/debian bullseye/main amd64 libjbig0 amd64 2.1-3.1+b2 [31.0 kB] Get: 47 http://deb.debian.org/debian bullseye/main amd64 libwebp6 amd64 0.6.1-2.1 [258 kB] Get: 48 http://deb.debian.org/debian bullseye/main amd64 libtiff5 amd64 4.2.0-1 [289 kB] Get: 49 http://deb.debian.org/debian bullseye/main amd64 libxau6 amd64 1:1.0.9-1 [19.7 kB] Get: 50 http://deb.debian.org/debian bullseye/main amd64 libxdmcp6 amd64 1:1.1.2-3 [26.3 kB] Get: 51 http://deb.debian.org/debian bullseye/main amd64 libxcb1 amd64 1.14-3 [140 kB] Get: 52 http://deb.debian.org/debian bullseye/main amd64 libx11-data all 2:1.7.2-1 [311 kB] Get: 53 http://deb.debian.org/debian bullseye/main amd64 libx11-6 amd64 2:1.7.2-1 [772 kB] Get: 54 http://deb.debian.org/debian bullseye/main amd64 libxpm4 amd64 1:3.5.12-1 [49.1 kB] Get: 55 http://deb.debian.org/debian bullseye/main amd64 libgd3 amd64 2.3.0-2 [137 kB] Get: 56 http://deb.debian.org/debian bullseye/main amd64 libgd-perl amd64 2.73-1+b1 [141 kB] Get: 57 http://deb.debian.org/debian bullseye/main amd64 libgd-barcode-perl all 1.15-7 [499 kB] Get: 58 http://deb.debian.org/debian bullseye/main amd64 libpdf-reuse-perl all 0.39-1.1 [78.5 kB] Get: 59 http://deb.debian.org/debian bullseye/main amd64 patchutils amd64 0.4.2-1 [77.5 kB] Fetched 24.4 MB in 0s (65.5 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19655 files and directories currently installed.) Preparing to unpack .../00-bsdextrautils_2.36.1-8_amd64.deb ... Unpacking bsdextrautils (2.36.1-8) ... Selecting previously unselected package libuchardet0:amd64. Preparing to unpack .../01-libuchardet0_0.0.7-1_amd64.deb ... Unpacking libuchardet0:amd64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../02-groff-base_1.22.4-6_amd64.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:amd64. Preparing to unpack .../03-libpipeline1_1.5.3-1_amd64.deb ... Unpacking libpipeline1:amd64 (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../04-man-db_2.9.4-2_amd64.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../05-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../06-libmagic-mgc_1%3a5.39-3_amd64.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:amd64. Preparing to unpack .../07-libmagic1_1%3a5.39-3_amd64.deb ... Unpacking libmagic1:amd64 (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../08-file_1%3a5.39-3_amd64.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../09-gettext-base_0.21-4_amd64.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package ucf. Preparing to unpack .../10-ucf_3.0043_all.deb ... Moving old data out of the way Unpacking ucf (3.0043) ... Selecting previously unselected package libsigsegv2:amd64. Preparing to unpack .../11-libsigsegv2_2.13-1_amd64.deb ... Unpacking libsigsegv2:amd64 (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../12-m4_1.4.18-5_amd64.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../13-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../14-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../15-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../16-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package cdbs. Preparing to unpack .../17-cdbs_0.4.163_all.deb ... Unpacking cdbs (0.4.163) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../18-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../19-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../20-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../21-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../22-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../23-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../24-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:amd64. Preparing to unpack .../25-libelf1_0.183-1_amd64.deb ... Unpacking libelf1:amd64 (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../26-dwz_0.13+20210201-1_amd64.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:amd64. Preparing to unpack .../27-libicu67_67.1-7_amd64.deb ... Unpacking libicu67:amd64 (67.1-7) ... Selecting previously unselected package libxml2:amd64. Preparing to unpack .../28-libxml2_2.9.10+dfsg-6.7_amd64.deb ... Unpacking libxml2:amd64 (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../29-gettext_0.21-4_amd64.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../30-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../31-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../32-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package fonts-dejavu-core. Preparing to unpack .../33-fonts-dejavu-core_2.37-2_all.deb ... Unpacking fonts-dejavu-core (2.37-2) ... Selecting previously unselected package fontconfig-config. Preparing to unpack .../34-fontconfig-config_2.13.1-4.2_all.deb ... Unpacking fontconfig-config (2.13.1-4.2) ... Selecting previously unselected package libbarcode-code128-perl. Preparing to unpack .../35-libbarcode-code128-perl_2.21-2_all.deb ... Unpacking libbarcode-code128-perl (2.21-2) ... Selecting previously unselected package libbrotli1:amd64. Preparing to unpack .../36-libbrotli1_1.0.9-2+b2_amd64.deb ... Unpacking libbrotli1:amd64 (1.0.9-2+b2) ... Selecting previously unselected package libmd0:amd64. Preparing to unpack .../37-libmd0_1.0.3-3_amd64.deb ... Unpacking libmd0:amd64 (1.0.3-3) ... Selecting previously unselected package libbsd0:amd64. Preparing to unpack .../38-libbsd0_0.11.3-1_amd64.deb ... Unpacking libbsd0:amd64 (0.11.3-1) ... Selecting previously unselected package libdeflate0:amd64. Preparing to unpack .../39-libdeflate0_1.7-1_amd64.deb ... Unpacking libdeflate0:amd64 (1.7-1) ... Selecting previously unselected package libexpat1:amd64. Preparing to unpack .../40-libexpat1_2.2.10-2_amd64.deb ... Unpacking libexpat1:amd64 (2.2.10-2) ... Selecting previously unselected package libpng16-16:amd64. Preparing to unpack .../41-libpng16-16_1.6.37-3_amd64.deb ... Unpacking libpng16-16:amd64 (1.6.37-3) ... Selecting previously unselected package libfreetype6:amd64. Preparing to unpack .../42-libfreetype6_2.10.4+dfsg-1_amd64.deb ... Unpacking libfreetype6:amd64 (2.10.4+dfsg-1) ... Selecting previously unselected package libfontconfig1:amd64. Preparing to unpack .../43-libfontconfig1_2.13.1-4.2_amd64.deb ... Unpacking libfontconfig1:amd64 (2.13.1-4.2) ... Selecting previously unselected package libjpeg62-turbo:amd64. Preparing to unpack .../44-libjpeg62-turbo_1%3a2.0.6-4_amd64.deb ... Unpacking libjpeg62-turbo:amd64 (1:2.0.6-4) ... Selecting previously unselected package libjbig0:amd64. Preparing to unpack .../45-libjbig0_2.1-3.1+b2_amd64.deb ... Unpacking libjbig0:amd64 (2.1-3.1+b2) ... Selecting previously unselected package libwebp6:amd64. Preparing to unpack .../46-libwebp6_0.6.1-2.1_amd64.deb ... Unpacking libwebp6:amd64 (0.6.1-2.1) ... Selecting previously unselected package libtiff5:amd64. Preparing to unpack .../47-libtiff5_4.2.0-1_amd64.deb ... Unpacking libtiff5:amd64 (4.2.0-1) ... Selecting previously unselected package libxau6:amd64. Preparing to unpack .../48-libxau6_1%3a1.0.9-1_amd64.deb ... Unpacking libxau6:amd64 (1:1.0.9-1) ... Selecting previously unselected package libxdmcp6:amd64. Preparing to unpack .../49-libxdmcp6_1%3a1.1.2-3_amd64.deb ... Unpacking libxdmcp6:amd64 (1:1.1.2-3) ... Selecting previously unselected package libxcb1:amd64. Preparing to unpack .../50-libxcb1_1.14-3_amd64.deb ... Unpacking libxcb1:amd64 (1.14-3) ... Selecting previously unselected package libx11-data. Preparing to unpack .../51-libx11-data_2%3a1.7.2-1_all.deb ... Unpacking libx11-data (2:1.7.2-1) ... Selecting previously unselected package libx11-6:amd64. Preparing to unpack .../52-libx11-6_2%3a1.7.2-1_amd64.deb ... Unpacking libx11-6:amd64 (2:1.7.2-1) ... Selecting previously unselected package libxpm4:amd64. Preparing to unpack .../53-libxpm4_1%3a3.5.12-1_amd64.deb ... Unpacking libxpm4:amd64 (1:3.5.12-1) ... Selecting previously unselected package libgd3:amd64. Preparing to unpack .../54-libgd3_2.3.0-2_amd64.deb ... Unpacking libgd3:amd64 (2.3.0-2) ... Selecting previously unselected package libgd-perl. Preparing to unpack .../55-libgd-perl_2.73-1+b1_amd64.deb ... Unpacking libgd-perl (2.73-1+b1) ... Selecting previously unselected package libgd-barcode-perl. Preparing to unpack .../56-libgd-barcode-perl_1.15-7_all.deb ... Unpacking libgd-barcode-perl (1.15-7) ... Selecting previously unselected package libpdf-reuse-perl. Preparing to unpack .../57-libpdf-reuse-perl_0.39-1.1_all.deb ... Unpacking libpdf-reuse-perl (0.39-1.1) ... Selecting previously unselected package patchutils. Preparing to unpack .../58-patchutils_0.4.2-1_amd64.deb ... Unpacking patchutils (0.4.2-1) ... Setting up libexpat1:amd64 (2.2.10-2) ... Setting up libpipeline1:amd64 (1.5.3-1) ... Setting up libxau6:amd64 (1:1.0.9-1) ... Setting up libpdf-reuse-perl (0.39-1.1) ... Setting up bsdextrautils (2.36.1-8) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:amd64 (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libbrotli1:amd64 (1.0.9-2+b2) ... Setting up libmagic1:amd64 (1:5.39-3) ... Setting up libdeflate0:amd64 (1.7-1) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up libjbig0:amd64 (2.1-3.1+b2) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up libjpeg62-turbo:amd64 (1:2.0.6-4) ... Setting up libx11-data (2:1.7.2-1) ... Setting up libsigsegv2:amd64 (2.13-1) ... Setting up libpng16-16:amd64 (1.6.37-3) ... Setting up autopoint (0.21-4) ... Setting up libwebp6:amd64 (0.6.1-2.1) ... Setting up fonts-dejavu-core (2.37-2) ... Setting up libmd0:amd64 (1.0.3-3) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:amd64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up libtiff5:amd64 (4.2.0-1) ... Setting up libbsd0:amd64 (0.11.3-1) ... Setting up cdbs (0.4.163) ... Setting up libelf1:amd64 (0.183-1) ... Setting up libxml2:amd64 (2.9.10+dfsg-6.7) ... Setting up libbarcode-code128-perl (2.21-2) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up libxdmcp6:amd64 (1:1.1.2-3) ... Setting up libxcb1:amd64 (1.14-3) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up m4 (1.4.18-5) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up patchutils (0.4.2-1) ... Setting up libfreetype6:amd64 (2.10.4+dfsg-1) ... Setting up ucf (3.0043) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up libx11-6:amd64 (2:1.7.2-1) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libxpm4:amd64 (1:3.5.12-1) ... Setting up fontconfig-config (2.13.1-4.2) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up libfontconfig1:amd64 (2.13.1-4.2) ... Setting up debhelper (13.3.4) ... Setting up libgd3:amd64 (2.3.0-2) ... Setting up libgd-perl (2.73-1+b1) ... Setting up libgd-barcode-perl (1.15-7) ... Processing triggers for libc-bin (2.31-13+deb11u2) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.25.3-1.1). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libpdf-reuse-barcode-perl-0.07/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libpdf-reuse-barcode-perl_0.07-1.1_source.changes dpkg-buildpackage: info: source package libpdf-reuse-barcode-perl dpkg-buildpackage: info: source version 0.07-1.1 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Holger Levsen dpkg-source --before-build . dpkg-buildpackage: info: host architecture amd64 fakeroot debian/rules clean test -x debian/rules rm -f debian/stamp-makefile-build debian/stamp-makefile-install /usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" -k clean make[1]: Entering directory '/build/libpdf-reuse-barcode-perl-0.07' make[1]: *** No rule to make target 'clean'. make[1]: Leaving directory '/build/libpdf-reuse-barcode-perl-0.07' make: [/usr/share/cdbs/1/class/makefile.mk:91: makefile-clean] Error 2 (ignored) rm -f debian/stamp-makefile-check dh_clean dh_clean: warning: Compatibility levels before 10 are deprecated (level 9 in use) debian/rules build test -x debian/rules mkdir -p "." cd . && /usr/bin/perl -I. Makefile.PL NOECHO= INSTALLDIRS=vendor Checking if your kit is complete... Looks good Generating a Unix-style Makefile Writing Makefile for PDF::Reuse::Barcode Writing MYMETA.yml and MYMETA.json /usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" all make[1]: Entering directory '/build/libpdf-reuse-barcode-perl-0.07' "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/PDF/Reuse chmod 755 blib/lib/PDF/Reuse touch blib/lib/PDF/Reuse/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch chmod 755 blib/arch touch blib/arch/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/lib/auto/PDF/Reuse/Barcode chmod 755 blib/lib/auto/PDF/Reuse/Barcode touch blib/lib/auto/PDF/Reuse/Barcode/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/arch/auto/PDF/Reuse/Barcode chmod 755 blib/arch/auto/PDF/Reuse/Barcode touch blib/arch/auto/PDF/Reuse/Barcode/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/bin chmod 755 blib/bin touch blib/bin/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/script chmod 755 blib/script touch blib/script/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man1 chmod 755 blib/man1 touch blib/man1/.exists "/usr/bin/perl" -MExtUtils::Command -e 'mkpath' -- blib/man3 chmod 755 blib/man3 touch blib/man3/.exists true true true "/usr/bin/perl" -MExtUtils::Install -e 'pm_to_blib({@ARGV}, '\''blib/lib/auto'\'', q[], '\''755'\'')' -- \ 'Barcode.pm' 'blib/lib/PDF/Reuse/Barcode.pm' cp Barcode.pm blib/lib/PDF/Reuse/Barcode.pm touch pm_to_blib true true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ Barcode.pm blib/man3/PDF::Reuse::Barcode.3pm Manifying 1 pod document true make[1]: Leaving directory '/build/libpdf-reuse-barcode-perl-0.07' touch debian/stamp-makefile-build /usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" test TEST_VERBOSE=1 make[1]: Entering directory '/build/libpdf-reuse-barcode-perl-0.07' true true true true true true true true true PERL_DL_NONLAZY=1 "/usr/bin/perl" "-Iblib/lib" "-Iblib/arch" test.pl 1..15 # Running under perl version 5.032001 for linux # Current time local: Fri Nov 5 03:06:37 2021 # Current time GMT: Fri Nov 5 15:06:37 2021 # Using Test.pm version 1.31 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 true make[1]: Leaving directory '/build/libpdf-reuse-barcode-perl-0.07' touch debian/stamp-makefile-check fakeroot debian/rules binary test -x debian/rules dh_testroot dh_prep dh_installdirs -A dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 9 in use) mkdir -p "." /usr/bin/make -C . OPTIMIZE="-g -O2 -fdebug-prefix-map=/build/libpdf-reuse-barcode-perl-0.07=. -fstack-protector-strong -Wformat -Werror=format-security -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -Wdate-time -D_FORTIFY_SOURCE=2 -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe -I/usr/local/include" LDDLFLAGS="-Wl,-z,relro -shared -L/usr/local/lib -fstack-protector-strong" install DESTDIR=" /build/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl" make[1]: Entering directory '/build/libpdf-reuse-barcode-perl-0.07' true true true true true true true true true "/usr/bin/perl" "-MExtUtils::Command::MM" -e pod2man "--" --section=3pm --perm_rw=644 -u \ Barcode.pm blib/man3/PDF::Reuse::Barcode.3pm Manifying 1 pod document true umask 022; "/usr/bin/perl" -MExtUtils::Install -e 'install([ from_to => {@ARGV}, verbose => '\''0'\'', uninstall_shadows => '\''0'\'', dir_mode => '\''755'\'' ]);' -- \ "blib/lib" "/build/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/perl5" \ "blib/arch" "/build/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/lib/x86_64-linux-gnu/perl5/5.32" \ "blib/bin" "/build/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/bin" \ "blib/script" "/build/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/bin" \ "blib/man1" "/build/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/man/man1" \ "blib/man3" "/build/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/man/man3" Installing /build/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/perl5/PDF/Reuse/Barcode.pm Installing /build/libpdf-reuse-barcode-perl-0.07/debian/libpdf-reuse-barcode-perl/usr/share/man/man3/PDF::Reuse::Barcode.3pm true true true make[1]: Leaving directory '/build/libpdf-reuse-barcode-perl-0.07' touch debian/stamp-makefile-install Adding cdbs dependencies to debian/libpdf-reuse-barcode-perl.substvars dh_installdirs -plibpdf-reuse-barcode-perl \ dh_installdirs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdocs -plibpdf-reuse-barcode-perl ./README dh_installdocs: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installexamples -plibpdf-reuse-barcode-perl dh_installexamples: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installman -plibpdf-reuse-barcode-perl dh_installman: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installinfo -plibpdf-reuse-barcode-perl dh_installinfo: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installmenu -plibpdf-reuse-barcode-perl dh_installcron -plibpdf-reuse-barcode-perl dh_systemd_enable -plibpdf-reuse-barcode-perl dh_systemd_enable: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installinit -plibpdf-reuse-barcode-perl dh_installinit: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_installdebconf -plibpdf-reuse-barcode-perl dh_installemacsen -plibpdf-reuse-barcode-perl dh_installcatalogs -plibpdf-reuse-barcode-perl dh_installpam -plibpdf-reuse-barcode-perl dh_installlogrotate -plibpdf-reuse-barcode-perl dh_installlogcheck -plibpdf-reuse-barcode-perl dh_installchangelogs -plibpdf-reuse-barcode-perl ./Changes dh_installudev -plibpdf-reuse-barcode-perl dh_lintian -plibpdf-reuse-barcode-perl dh_bugfiles -plibpdf-reuse-barcode-perl dh_install -plibpdf-reuse-barcode-perl dh_install: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_systemd_start -plibpdf-reuse-barcode-perl dh_systemd_start: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_link -plibpdf-reuse-barcode-perl dh_installmime -plibpdf-reuse-barcode-perl dh_installgsettings -plibpdf-reuse-barcode-perl dh_strip -plibpdf-reuse-barcode-perl dh_strip: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_strip_nondeterminism -plibpdf-reuse-barcode-perl dh_compress -plibpdf-reuse-barcode-perl dh_compress: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_fixperms -plibpdf-reuse-barcode-perl dh_makeshlibs -plibpdf-reuse-barcode-perl dh_installdeb -plibpdf-reuse-barcode-perl dh_installdeb: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_perl -plibpdf-reuse-barcode-perl dh_shlibdeps -plibpdf-reuse-barcode-perl dh_shlibdeps: warning: Compatibility levels before 10 are deprecated (level 9 in use) dh_gencontrol -plibpdf-reuse-barcode-perl dh_md5sums -plibpdf-reuse-barcode-perl dh_builddeb -plibpdf-reuse-barcode-perl dpkg-deb: building package 'libpdf-reuse-barcode-perl' in '../libpdf-reuse-barcode-perl_0.07-1.1_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../libpdf-reuse-barcode-perl_0.07-1.1_amd64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/3892069 and its subdirectories I: Current time: Fri Nov 5 03:06:53 -12 2021 I: pbuilder-time-stamp: 1636124813 Fri Nov 5 15:06:53 UTC 2021 I: 1st build successful. Starting 2nd build on remote node ionos15-amd64.debian.net. Fri Nov 5 15:06:53 UTC 2021 I: Preparing to do remote build '2' on ionos15-amd64.debian.net. Fri Nov 5 15:07:23 UTC 2021 I: Deleting $TMPDIR on ionos15-amd64.debian.net. Fri Nov 5 15:07:23 UTC 2021 I: libpdf-reuse-barcode-perl_0.07-1.1_amd64.changes: Format: 1.8 Date: Sun, 03 Jan 2021 13:29:08 +0100 Source: libpdf-reuse-barcode-perl Binary: libpdf-reuse-barcode-perl Architecture: all Version: 0.07-1.1 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Holger Levsen Description: libpdf-reuse-barcode-perl - Create barcodes for PDF documents with PDF::Reuse Changes: libpdf-reuse-barcode-perl (0.07-1.1) unstable; urgency=medium . * Non maintainer upload by the Reproducible Builds team. * No source change upload to rebuild on buildd with .buildinfo files. Checksums-Sha1: f55f2807a9703e507b09b2669c957f7781588f1c 15920 libpdf-reuse-barcode-perl_0.07-1.1_all.deb 758c0d0210d04605260756e29631fafb88984452 5555 libpdf-reuse-barcode-perl_0.07-1.1_amd64.buildinfo Checksums-Sha256: d7e8aebd6902119b36a8b7be3eeae9a833fd0cc339c5d3b6de190350e2924bfd 15920 libpdf-reuse-barcode-perl_0.07-1.1_all.deb b5c2e78df8169b13e320c2b1a092a0b4fe96899e8688827d13e1ba1ed9a3f9ae 5555 libpdf-reuse-barcode-perl_0.07-1.1_amd64.buildinfo Files: f68b610ac4d4ad049483368f7461d669 15920 perl optional libpdf-reuse-barcode-perl_0.07-1.1_all.deb 37f755b081fb01a204274550b5a55636 5555 perl optional libpdf-reuse-barcode-perl_0.07-1.1_amd64.buildinfo Fri Nov 5 15:07:28 UTC 2021 I: will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --html /srv/reproducible-results/rbuild-debian/tmp.qNXNPl3olG/libpdf-reuse-barcode-perl_0.07-1.1.diffoscope.html --text /srv/reproducible-results/rbuild-debian/tmp.qNXNPl3olG/libpdf-reuse-barcode-perl_0.07-1.1.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/tmp.qNXNPl3olG/libpdf-reuse-barcode-perl_0.07-1.1.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/tmp.qNXNPl3olG/b1/libpdf-reuse-barcode-perl_0.07-1.1_amd64.changes /srv/reproducible-results/rbuild-debian/tmp.qNXNPl3olG/b2/libpdf-reuse-barcode-perl_0.07-1.1_amd64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 4.763s) 4.763s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.503s) 0.503s 10 calls diffoscope.comparators.binary.FilesystemFile 0.000s 8 calls abc.DotChangesFile Fri Nov 5 15:07:34 UTC 2021 I: found no differences in the changes files, and a .buildinfo file also exists. Fri Nov 5 15:07:34 UTC 2021 I: libpdf-reuse-barcode-perl from bullseye built successfully and reproducibly on amd64. Fri Nov 5 15:07:36 UTC 2021 I: Submitting .buildinfo files to external archives: Fri Nov 5 15:07:36 UTC 2021 I: Submitting 8.0K b1/libpdf-reuse-barcode-perl_0.07-1.1_amd64.buildinfo.asc Fri Nov 5 15:07:37 UTC 2021 I: Submitting 8.0K b2/libpdf-reuse-barcode-perl_0.07-1.1_amd64.buildinfo.asc Fri Nov 5 15:07:38 UTC 2021 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Fri Nov 5 15:07:38 UTC 2021 I: Done submitting .buildinfo files. Fri Nov 5 15:07:38 UTC 2021 I: Removing signed libpdf-reuse-barcode-perl_0.07-1.1_amd64.buildinfo.asc files: removed './b1/libpdf-reuse-barcode-perl_0.07-1.1_amd64.buildinfo.asc' removed './b2/libpdf-reuse-barcode-perl_0.07-1.1_amd64.buildinfo.asc'