Wed May 10 02:12:03 UTC 2023 I: starting to build libconfig-std-perl/bookworm/arm64 on jenkins on '2023-05-10 02:11' Wed May 10 02:12:03 UTC 2023 I: The jenkins build log is/was available at https://jenkins.debian.net/userContent/reproducible/debian/build_service/arm64_21/23837/console.log Wed May 10 02:12:03 UTC 2023 I: Downloading source for bookworm/libconfig-std-perl=0.903-3 --2023-05-10 02:12:03-- http://cdn-fastly.deb.debian.org/debian/pool/main/libc/libconfig-std-perl/libconfig-std-perl_0.903-3.dsc Connecting to 78.137.99.97:3128... connected. Proxy request sent, awaiting response... 200 OK Length: 2269 (2.2K) [text/prs.lines.tag] Saving to: ‘libconfig-std-perl_0.903-3.dsc’ 0K .. 100% 178M=0s 2023-05-10 02:12:04 (178 MB/s) - ‘libconfig-std-perl_0.903-3.dsc’ saved [2269/2269] Wed May 10 02:12:04 UTC 2023 I: libconfig-std-perl_0.903-3.dsc -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA512 Format: 3.0 (quilt) Source: libconfig-std-perl Binary: libconfig-std-perl Architecture: all Version: 0.903-3 Maintainer: Debian Perl Group Uploaders: Damyan Ivanov , Salvatore Bonaccorso , gregor herrmann Homepage: https://metacpan.org/release/Config-Std Standards-Version: 4.1.3 Vcs-Browser: https://salsa.debian.org/perl-team/modules/packages/libconfig-std-perl Vcs-Git: https://salsa.debian.org/perl-team/modules/packages/libconfig-std-perl.git Testsuite: autopkgtest-pkg-perl Build-Depends: debhelper-compat (= 12), libmodule-build-perl Build-Depends-Indep: perl, libclass-std-perl, libtest-pod-perl, libtest-pod-coverage-perl Package-List: libconfig-std-perl deb perl optional arch=all Checksums-Sha1: 5087779f01361b024c4206897bc163e1d017ea86 21667 libconfig-std-perl_0.903.orig.tar.gz fb266bebc6525efd0613b33000fd56db23a7f1c3 3932 libconfig-std-perl_0.903-3.debian.tar.xz Checksums-Sha256: b7709ff663bd279d264ab9c2f51e9e9588479a3367a8c4cfc18659c2a11480fe 21667 libconfig-std-perl_0.903.orig.tar.gz 7a79d6288935f453811fd776718b8c73dd3dbca0e8fa8cfbf375c693e153239b 3932 libconfig-std-perl_0.903-3.debian.tar.xz Files: 7b224f1a4f1a292794ffa625daa31750 21667 libconfig-std-perl_0.903.orig.tar.gz c11eb255f016e14cc2c3e1abb86a0344 3932 libconfig-std-perl_0.903-3.debian.tar.xz -----BEGIN PGP SIGNATURE----- iQIzBAEBCgAdFiEEsjhixBXWVlpOhsvXV5wWDUyeI+gFAmN5IjwACgkQV5wWDUye I+h41A/+ON0+THJ7sryv8EV0o3Kc7XpgbUqWdq5UMvHobN6A4rPg+MjUU3mcciQu lzuOX1EDIDCioJQwMzkUyybW562Wd8nxu1bSmxmBiFgBIAYzfU2M/0ZTTKcwd/R8 IeagSIbszTXAynum4owzccAONTjAFbz9w4rDtCGZLvPWK2EHpwl0V5MqgdhjWGKo Tmxm3ucwwqoKev4C0P23X2iCgUoACqvD7W792vsqGeqWcSVkaaHTxrUMbLJ0jTW7 dahLTFWmj9TZYgMiV8BB/Opc2cHh7uUaBVuV/BEUOeNcwd9bvAS7NmvM3B4a7nWa HWCh5RxAYee0cPbYQm7DRvmtKuqcDGAZD+Fn+7R40Ri2i+Geu8WrDQBaee2akoug 60gs1WQhypIAZdFxdqDMQRxIjmF/ZqwgGnxD57es8QafjYMtVM1qS8o/pYSA5bLX GdIRD5j/IRVkKzHCtdG1W1CVs4OjiCizGxYfD/l1ZSKj8pVI/PZhCISz8DeNOsga XS2ptOpXekYXa1N8zQ0lDPRMvM3l1BusmiccSoUFsFsYYm81AZuun4IYlME/fUTM LX1nD19gkVuv/1mM1cnembCOPvNP+kK6svowXKQ0Qn4B6XeHy/Pc5dNq3QtQJQW5 hQdrf9gA4xSS8zX4P/btXmJoPU0FJWaCcy1g6y2DOFXj1FD6+LE= =FZ0r -----END PGP SIGNATURE----- Wed May 10 02:12:04 UTC 2023 I: Checking whether the package is not for us Wed May 10 02:12:04 UTC 2023 I: Starting 1st build on remote node codethink14-arm64.debian.net. Wed May 10 02:12:04 UTC 2023 I: Preparing to do remote build '1' on codethink14-arm64.debian.net. Wed May 10 02:12:48 UTC 2023 I: Deleting $TMPDIR on codethink14-arm64.debian.net. I: pbuilder: network access will be disabled during build I: Current time: Tue May 9 14:12:08 -12 2023 I: pbuilder-time-stamp: 1683684728 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bookworm-reproducible-base.tgz] I: copying local configuration W: --override-config is not set; not updating apt.conf Read the manpage for details. I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [libconfig-std-perl_0.903-3.dsc] I: copying [./libconfig-std-perl_0.903.orig.tar.gz] I: copying [./libconfig-std-perl_0.903-3.debian.tar.xz] I: Extracting source gpgv: Signature made Sat Nov 19 06:36:44 2022 -12 gpgv: using RSA key B23862C415D6565A4E86CBD7579C160D4C9E23E8 gpgv: Can't check signature: No public key dpkg-source: warning: cannot verify inline signature for ./libconfig-std-perl_0.903-3.dsc: no acceptable signature found dpkg-source: info: extracting libconfig-std-perl in libconfig-std-perl-0.903 dpkg-source: info: unpacking libconfig-std-perl_0.903.orig.tar.gz dpkg-source: info: unpacking libconfig-std-perl_0.903-3.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying spelling-error-in-manpage.patch I: using fakeroot in build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/11585/tmp/hooks/D02_print_environment starting I: set BUILDDIR='/build' BUILDUSERGECOS='first user,first room,first work-phone,first home-phone,first other' BUILDUSERNAME='pbuilder1' BUILD_ARCH='arm64' DEBIAN_FRONTEND='noninteractive' DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all parallel=8' DISTRIBUTION='bookworm' HOME='/var/lib/jenkins' HOST_ARCH='arm64' IFS=' ' LANG='C' LANGUAGE='en_US:en' LC_ALL='C' MAIL='/var/mail/root' OPTIND='1' PATH='/usr/sbin:/usr/bin:/sbin:/bin:/usr/games' PBCURRENTCOMMANDLINEOPERATION='build' PBUILDER_OPERATION='build' PBUILDER_PKGDATADIR='/usr/share/pbuilder' PBUILDER_PKGLIBDIR='/usr/lib/pbuilder' PBUILDER_SYSCONFDIR='/etc' PPID='11585' PS1='# ' PS2='> ' PS4='+ ' PWD='/' SHELL='/bin/bash' SHLVL='2' SUDO_COMMAND='/usr/bin/timeout -k 18.1h 18h /usr/bin/ionice -c 3 /usr/bin/nice /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/r-b-build.tEUTlKI5/pbuilderrc_YPhz --distribution bookworm --hookdir /etc/pbuilder/first-build-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bookworm-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/r-b-build.tEUTlKI5/b1 --logfile b1/build.log libconfig-std-perl_0.903-3.dsc' SUDO_GID='117' SUDO_UID='110' SUDO_USER='jenkins' TERM='unknown' TZ='/usr/share/zoneinfo/Etc/GMT+12' USER='root' USERNAME='root' _='/usr/bin/systemd-run' http_proxy='http://192.168.101.16:3128' I: uname -a Linux codethink14-arm64 4.15.0-210-generic #221-Ubuntu SMP Tue Apr 18 08:32:48 UTC 2023 aarch64 GNU/Linux I: ls -l /bin lrwxrwxrwx 1 root root 7 May 6 22:27 /bin -> usr/bin I: user script /srv/workspace/pbuilder/11585/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: arm64 Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 12), libmodule-build-perl, perl, libclass-std-perl, libtest-pod-perl, libtest-pod-coverage-perl dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19616 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on libmodule-build-perl; however: Package libmodule-build-perl is not installed. pbuilder-satisfydepends-dummy depends on libclass-std-perl; however: Package libclass-std-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-perl; however: Package libtest-pod-perl is not installed. pbuilder-satisfydepends-dummy depends on libtest-pod-coverage-perl; however: Package libtest-pod-coverage-perl is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-strip-nondeterminism{a} dwz{a} file{a} gettext{a} gettext-base{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libclass-std-perl{a} libdebhelper-perl{a} libdevel-symdump-perl{a} libelf1{a} libfile-stripnondeterminism-perl{a} libicu72{a} libmagic-mgc{a} libmagic1{a} libmodule-build-perl{a} libpipeline1{a} libpod-coverage-perl{a} libpod-parser-perl{a} libsub-override-perl{a} libtest-pod-coverage-perl{a} libtest-pod-perl{a} libtool{a} libuchardet0{a} libxml2{a} m4{a} man-db{a} po-debconf{a} sensible-utils{a} The following packages are RECOMMENDED but will NOT be installed: curl libarchive-cpio-perl libltdl-dev libmail-sendmail-perl libmodule-signature-perl libpod-readme-perl libsoftware-license-perl lynx wget 0 packages upgraded, 37 newly installed, 0 to remove and 0 not upgraded. Need to get 18.8 MB of archives. After unpacking 75.5 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bookworm/main arm64 sensible-utils all 0.0.17+nmu1 [19.0 kB] Get: 2 http://deb.debian.org/debian bookworm/main arm64 libmagic-mgc arm64 1:5.44-3 [305 kB] Get: 3 http://deb.debian.org/debian bookworm/main arm64 libmagic1 arm64 1:5.44-3 [98.5 kB] Get: 4 http://deb.debian.org/debian bookworm/main arm64 file arm64 1:5.44-3 [42.5 kB] Get: 5 http://deb.debian.org/debian bookworm/main arm64 gettext-base arm64 0.21-12 [159 kB] Get: 6 http://deb.debian.org/debian bookworm/main arm64 libuchardet0 arm64 0.0.7-1 [67.9 kB] Get: 7 http://deb.debian.org/debian bookworm/main arm64 groff-base arm64 1.22.4-10 [861 kB] Get: 8 http://deb.debian.org/debian bookworm/main arm64 bsdextrautils arm64 2.38.1-5+b1 [86.9 kB] Get: 9 http://deb.debian.org/debian bookworm/main arm64 libpipeline1 arm64 1.5.7-1 [36.4 kB] Get: 10 http://deb.debian.org/debian bookworm/main arm64 man-db arm64 2.11.2-2 [1369 kB] Get: 11 http://deb.debian.org/debian bookworm/main arm64 m4 arm64 1.4.19-3 [276 kB] Get: 12 http://deb.debian.org/debian bookworm/main arm64 autoconf all 2.71-3 [332 kB] Get: 13 http://deb.debian.org/debian bookworm/main arm64 autotools-dev all 20220109.1 [51.6 kB] Get: 14 http://deb.debian.org/debian bookworm/main arm64 automake all 1:1.16.5-1.3 [823 kB] Get: 15 http://deb.debian.org/debian bookworm/main arm64 autopoint all 0.21-12 [495 kB] Get: 16 http://deb.debian.org/debian bookworm/main arm64 libdebhelper-perl all 13.11.4 [81.2 kB] Get: 17 http://deb.debian.org/debian bookworm/main arm64 libtool all 2.4.7-5 [517 kB] Get: 18 http://deb.debian.org/debian bookworm/main arm64 dh-autoreconf all 20 [17.1 kB] Get: 19 http://deb.debian.org/debian bookworm/main arm64 libarchive-zip-perl all 1.68-1 [104 kB] Get: 20 http://deb.debian.org/debian bookworm/main arm64 libsub-override-perl all 0.09-4 [9304 B] Get: 21 http://deb.debian.org/debian bookworm/main arm64 libfile-stripnondeterminism-perl all 1.13.1-1 [19.4 kB] Get: 22 http://deb.debian.org/debian bookworm/main arm64 dh-strip-nondeterminism all 1.13.1-1 [8620 B] Get: 23 http://deb.debian.org/debian bookworm/main arm64 libelf1 arm64 0.188-2.1 [173 kB] Get: 24 http://deb.debian.org/debian bookworm/main arm64 dwz arm64 0.15-1 [101 kB] Get: 25 http://deb.debian.org/debian bookworm/main arm64 libicu72 arm64 72.1-3 [9204 kB] Get: 26 http://deb.debian.org/debian bookworm/main arm64 libxml2 arm64 2.9.14+dfsg-1.2 [620 kB] Get: 27 http://deb.debian.org/debian bookworm/main arm64 gettext arm64 0.21-12 [1248 kB] Get: 28 http://deb.debian.org/debian bookworm/main arm64 intltool-debian all 0.35.0+20060710.6 [22.9 kB] Get: 29 http://deb.debian.org/debian bookworm/main arm64 po-debconf all 1.0.21+nmu1 [248 kB] Get: 30 http://deb.debian.org/debian bookworm/main arm64 debhelper all 13.11.4 [942 kB] Get: 31 http://deb.debian.org/debian bookworm/main arm64 libclass-std-perl all 0.013-3 [45.6 kB] Get: 32 http://deb.debian.org/debian bookworm/main arm64 libdevel-symdump-perl all 2.18-5 [15.8 kB] Get: 33 http://deb.debian.org/debian bookworm/main arm64 libmodule-build-perl all 0.423200-1 [253 kB] Get: 34 http://deb.debian.org/debian bookworm/main arm64 libpod-parser-perl all 1.65-1 [96.3 kB] Get: 35 http://deb.debian.org/debian bookworm/main arm64 libpod-coverage-perl all 0.23-2 [22.1 kB] Get: 36 http://deb.debian.org/debian bookworm/main arm64 libtest-pod-coverage-perl all 1.10-3 [14.9 kB] Get: 37 http://deb.debian.org/debian bookworm/main arm64 libtest-pod-perl all 1.52-2 [12.9 kB] Fetched 18.8 MB in 1s (36.6 MB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package sensible-utils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19616 files and directories currently installed.) Preparing to unpack .../00-sensible-utils_0.0.17+nmu1_all.deb ... Unpacking sensible-utils (0.0.17+nmu1) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../01-libmagic-mgc_1%3a5.44-3_arm64.deb ... Unpacking libmagic-mgc (1:5.44-3) ... Selecting previously unselected package libmagic1:arm64. Preparing to unpack .../02-libmagic1_1%3a5.44-3_arm64.deb ... Unpacking libmagic1:arm64 (1:5.44-3) ... Selecting previously unselected package file. Preparing to unpack .../03-file_1%3a5.44-3_arm64.deb ... Unpacking file (1:5.44-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../04-gettext-base_0.21-12_arm64.deb ... Unpacking gettext-base (0.21-12) ... Selecting previously unselected package libuchardet0:arm64. Preparing to unpack .../05-libuchardet0_0.0.7-1_arm64.deb ... Unpacking libuchardet0:arm64 (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../06-groff-base_1.22.4-10_arm64.deb ... Unpacking groff-base (1.22.4-10) ... Selecting previously unselected package bsdextrautils. Preparing to unpack .../07-bsdextrautils_2.38.1-5+b1_arm64.deb ... Unpacking bsdextrautils (2.38.1-5+b1) ... Selecting previously unselected package libpipeline1:arm64. Preparing to unpack .../08-libpipeline1_1.5.7-1_arm64.deb ... Unpacking libpipeline1:arm64 (1.5.7-1) ... Selecting previously unselected package man-db. Preparing to unpack .../09-man-db_2.11.2-2_arm64.deb ... Unpacking man-db (2.11.2-2) ... Selecting previously unselected package m4. Preparing to unpack .../10-m4_1.4.19-3_arm64.deb ... Unpacking m4 (1.4.19-3) ... Selecting previously unselected package autoconf. Preparing to unpack .../11-autoconf_2.71-3_all.deb ... Unpacking autoconf (2.71-3) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../12-autotools-dev_20220109.1_all.deb ... Unpacking autotools-dev (20220109.1) ... Selecting previously unselected package automake. Preparing to unpack .../13-automake_1%3a1.16.5-1.3_all.deb ... Unpacking automake (1:1.16.5-1.3) ... Selecting previously unselected package autopoint. Preparing to unpack .../14-autopoint_0.21-12_all.deb ... Unpacking autopoint (0.21-12) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../15-libdebhelper-perl_13.11.4_all.deb ... Unpacking libdebhelper-perl (13.11.4) ... Selecting previously unselected package libtool. Preparing to unpack .../16-libtool_2.4.7-5_all.deb ... Unpacking libtool (2.4.7-5) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../17-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../18-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../19-libsub-override-perl_0.09-4_all.deb ... Unpacking libsub-override-perl (0.09-4) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../20-libfile-stripnondeterminism-perl_1.13.1-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.13.1-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../21-dh-strip-nondeterminism_1.13.1-1_all.deb ... Unpacking dh-strip-nondeterminism (1.13.1-1) ... Selecting previously unselected package libelf1:arm64. Preparing to unpack .../22-libelf1_0.188-2.1_arm64.deb ... Unpacking libelf1:arm64 (0.188-2.1) ... Selecting previously unselected package dwz. Preparing to unpack .../23-dwz_0.15-1_arm64.deb ... Unpacking dwz (0.15-1) ... Selecting previously unselected package libicu72:arm64. Preparing to unpack .../24-libicu72_72.1-3_arm64.deb ... Unpacking libicu72:arm64 (72.1-3) ... Selecting previously unselected package libxml2:arm64. Preparing to unpack .../25-libxml2_2.9.14+dfsg-1.2_arm64.deb ... Unpacking libxml2:arm64 (2.9.14+dfsg-1.2) ... Selecting previously unselected package gettext. Preparing to unpack .../26-gettext_0.21-12_arm64.deb ... Unpacking gettext (0.21-12) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../27-intltool-debian_0.35.0+20060710.6_all.deb ... Unpacking intltool-debian (0.35.0+20060710.6) ... Selecting previously unselected package po-debconf. Preparing to unpack .../28-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../29-debhelper_13.11.4_all.deb ... Unpacking debhelper (13.11.4) ... Selecting previously unselected package libclass-std-perl. Preparing to unpack .../30-libclass-std-perl_0.013-3_all.deb ... Unpacking libclass-std-perl (0.013-3) ... Selecting previously unselected package libdevel-symdump-perl. Preparing to unpack .../31-libdevel-symdump-perl_2.18-5_all.deb ... Unpacking libdevel-symdump-perl (2.18-5) ... Selecting previously unselected package libmodule-build-perl. Preparing to unpack .../32-libmodule-build-perl_0.423200-1_all.deb ... Adding 'diversion of /usr/bin/config_data to /usr/bin/config_data.diverted by libmodule-build-perl' Adding 'diversion of /usr/share/man/man1/config_data.1.gz to /usr/share/man/man1/config_data.diverted.1.gz by libmodule-build-perl' Unpacking libmodule-build-perl (0.423200-1) ... Selecting previously unselected package libpod-parser-perl. Preparing to unpack .../33-libpod-parser-perl_1.65-1_all.deb ... Adding 'diversion of /usr/bin/podselect to /usr/bin/podselect.bundled by libpod-parser-perl' Adding 'diversion of /usr/share/man/man1/podselect.1.gz to /usr/share/man/man1/podselect.bundled.1.gz by libpod-parser-perl' Unpacking libpod-parser-perl (1.65-1) ... Selecting previously unselected package libpod-coverage-perl. Preparing to unpack .../34-libpod-coverage-perl_0.23-2_all.deb ... Unpacking libpod-coverage-perl (0.23-2) ... Selecting previously unselected package libtest-pod-coverage-perl. Preparing to unpack .../35-libtest-pod-coverage-perl_1.10-3_all.deb ... Unpacking libtest-pod-coverage-perl (1.10-3) ... Selecting previously unselected package libtest-pod-perl. Preparing to unpack .../36-libtest-pod-perl_1.52-2_all.deb ... Unpacking libtest-pod-perl (1.52-2) ... Setting up libpipeline1:arm64 (1.5.7-1) ... Setting up libicu72:arm64 (72.1-3) ... Setting up bsdextrautils (2.38.1-5+b1) ... Setting up libmagic-mgc (1:5.44-3) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libdebhelper-perl (13.11.4) ... Setting up libtest-pod-perl (1.52-2) ... Setting up libmagic1:arm64 (1:5.44-3) ... Setting up gettext-base (0.21-12) ... Setting up m4 (1.4.19-3) ... Setting up file (1:5.44-3) ... Setting up libmodule-build-perl (0.423200-1) ... Setting up autotools-dev (20220109.1) ... Setting up libpod-parser-perl (1.65-1) ... Setting up autopoint (0.21-12) ... Setting up autoconf (2.71-3) ... Setting up libclass-std-perl (0.013-3) ... Setting up sensible-utils (0.0.17+nmu1) ... Setting up libuchardet0:arm64 (0.0.7-1) ... Setting up libsub-override-perl (0.09-4) ... Setting up libdevel-symdump-perl (2.18-5) ... Setting up libelf1:arm64 (0.188-2.1) ... Setting up libxml2:arm64 (2.9.14+dfsg-1.2) ... Setting up automake (1:1.16.5-1.3) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up libfile-stripnondeterminism-perl (1.13.1-1) ... Setting up gettext (0.21-12) ... Setting up libtool (2.4.7-5) ... Setting up libpod-coverage-perl (0.23-2) ... Setting up intltool-debian (0.35.0+20060710.6) ... Setting up dh-autoreconf (20) ... Setting up dh-strip-nondeterminism (1.13.1-1) ... Setting up dwz (0.15-1) ... Setting up groff-base (1.22.4-10) ... Setting up libtest-pod-coverage-perl (1.10-3) ... Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.11.2-2) ... Not building database; man-db/auto-update is not 'true'. Setting up debhelper (13.11.4) ... Processing triggers for libc-bin (2.36-9) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... fakeroot is already the newest version (1.31-1.2). 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. I: Building the package I: Running cd /build/libconfig-std-perl-0.903/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" HOME="/nonexistent/first-build" dpkg-genchanges -S > ../libconfig-std-perl_0.903-3_source.changes dpkg-buildpackage: info: source package libconfig-std-perl dpkg-buildpackage: info: source version 0.903-3 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jelmer Vernooij dpkg-source --before-build . dpkg-buildpackage: info: host architecture arm64 fakeroot debian/rules clean dh clean dh_clean debian/rules build dh build dh_update_autotools_config dh_autoreconf dh_auto_configure /usr/bin/perl Build.PL --installdirs vendor --config "optimize=-g -O2 -ffile-prefix-map=/build/libconfig-std-perl-0.903=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" --config "ld=aarch64-linux-gnu-gcc -g -O2 -ffile-prefix-map=/build/libconfig-std-perl-0.903=. -fstack-protector-strong -Wformat -Werror=format-security -Wl,-z,relro" Checking prerequisites... recommends: * Test::Distribution is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Run 'Build installdeps' to install missing prerequisites. Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Config-Std' version '0.903' dh_auto_build /usr/bin/perl Build Building Config-Std dh_auto_test /usr/bin/perl Build test --verbose 1 # Testing Config::Std 0.903 t/00.load.t ......... 1..1 ok 1 - use Config::Std; ok t/00write.t ......... ok 1 - Write succeeded ok 2 - File created ok 3 - File read ok 4 - DATA loaded ok 5 - Content correct 1..5 ok t/01read.t .......... ok 1 - Read succeeded ok 2 - Data correct 1..2 ok t/01read_renamed.t .. ok 1 - Read succeeded ok 2 - Data correct 1..2 ok t/02rewrite.t ....... ok 1 - Read succeeded ok 2 - Data correct ok 3 - Write succeeded ok 4 - File opened ok 5 - File read ok 6 - DATA loaded ok 7 - Extra content correct 1..7 ok t/02rewrite_eq.t .... ok 1 - Read succeeded ok 2 - Write succeeded ok 3 - File opened ok 4 - File read ok 5 - DATA loaded ok 6 - Extra content correct 1..6 ok t/03autoviv.t ....... ok 1 - Mutation via hash ok 2 - Mutation via hash-ref 1..2 ok t/comments.t ........ ok 1 - Comments preserved on simple round-trip ok 2 - Comments preserved on mutating round-trip 1..2 ok t/pod-coverage.t .... 1..1 ok 1 - Pod coverage on Config::Std ok t/pod.t ............. 1..1 ok 1 - POD test for blib/lib/Config/Std.pm ok t/undef.t ........... ok 1 - Write failed as expected ok 2 - Failed with expected exception 1..2 ok All tests successful. Files=11, Tests=31, 3 wallclock secs ( 0.12 usr 0.02 sys + 2.36 cusr 0.28 csys = 2.78 CPU) Result: PASS create-stamp debian/debhelper-build-stamp fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_auto_install --destdir=debian/libconfig-std-perl/ /usr/bin/perl Build install --destdir /build/libconfig-std-perl-0.903/debian/libconfig-std-perl --create_packlist 0 Building Config-Std Installing /build/libconfig-std-perl-0.903/debian/libconfig-std-perl/usr/share/perl5/Config/Std.pm Installing /build/libconfig-std-perl-0.903/debian/libconfig-std-perl/usr/share/man/man3/Config::Std.3pm dh_installdocs dh_installchangelogs dh_installman dh_perl dh_link dh_strip_nondeterminism dh_compress dh_fixperms dh_missing dh_installdeb dh_gencontrol dh_md5sums dh_builddeb dpkg-deb: building package 'libconfig-std-perl' in '../libconfig-std-perl_0.903-3_all.deb'. dpkg-genbuildinfo --build=binary -O../libconfig-std-perl_0.903-3_arm64.buildinfo dpkg-genchanges --build=binary -O../libconfig-std-perl_0.903-3_arm64.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/11585 and its subdirectories I: Current time: Tue May 9 14:12:48 -12 2023 I: pbuilder-time-stamp: 1683684768 Wed May 10 02:12:49 UTC 2023 I: 1st build successful. Starting 2nd build on remote node codethink9-arm64.debian.net. Wed May 10 02:12:49 UTC 2023 I: Preparing to do remote build '2' on codethink9-arm64.debian.net. Wed May 10 02:13:41 UTC 2023 I: Deleting $TMPDIR on codethink9-arm64.debian.net. Wed May 10 02:13:41 UTC 2023 I: libconfig-std-perl_0.903-3_arm64.changes: Format: 1.8 Date: Sat, 19 Nov 2022 18:36:01 +0000 Source: libconfig-std-perl Binary: libconfig-std-perl Architecture: all Version: 0.903-3 Distribution: unstable Urgency: medium Maintainer: Debian Perl Group Changed-By: Jelmer Vernooij Description: libconfig-std-perl - Load and save configuration files in a standard format Changes: libconfig-std-perl (0.903-3) unstable; urgency=medium . [ Debian Janitor ] * Apply multi-arch hints. + libconfig-std-perl: Add Multi-Arch: foreign. Checksums-Sha1: 035971ebb8ecfc20a20fc694d11c1761df34b6fc 23664 libconfig-std-perl_0.903-3_all.deb 7982e734e5e59531d1a4841c9438d58cd8e5d43d 5136 libconfig-std-perl_0.903-3_arm64.buildinfo Checksums-Sha256: 85ecac3435d3b2ee276d0c52f631ffbf116e57262d6da70523878b666f7e0f85 23664 libconfig-std-perl_0.903-3_all.deb 0d5a058b3254fa024d22975b3944b7d43ee2d947a464dd80c1be13a075e78479 5136 libconfig-std-perl_0.903-3_arm64.buildinfo Files: ed9ea43637957027c7d98276c40c8a65 23664 perl optional libconfig-std-perl_0.903-3_all.deb 705ebedbaa9bd0fcf7c753f0e340a715 5136 perl optional libconfig-std-perl_0.903-3_arm64.buildinfo Wed May 10 02:13:43 UTC 2023 I: diffoscope 242 will be used to compare the two builds: # Profiling output for: /usr/bin/diffoscope --timeout 7200 --html /srv/reproducible-results/rbuild-debian/r-b-build.tEUTlKI5/libconfig-std-perl_0.903-3.diffoscope.html --text /srv/reproducible-results/rbuild-debian/r-b-build.tEUTlKI5/libconfig-std-perl_0.903-3.diffoscope.txt --json /srv/reproducible-results/rbuild-debian/r-b-build.tEUTlKI5/libconfig-std-perl_0.903-3.diffoscope.json --profile=- /srv/reproducible-results/rbuild-debian/r-b-build.tEUTlKI5/b1/libconfig-std-perl_0.903-3_arm64.changes /srv/reproducible-results/rbuild-debian/r-b-build.tEUTlKI5/b2/libconfig-std-perl_0.903-3_arm64.changes ## command (total time: 0.000s) 0.000s 1 call cmp (internal) ## has_same_content_as (total time: 0.000s) 0.000s 1 call abc.DotChangesFile ## main (total time: 0.338s) 0.338s 2 calls outputs 0.000s 1 call cleanup ## recognizes (total time: 0.016s) 0.016s 12 calls diffoscope.comparators.binary.FilesystemFile 0.000s 10 calls abc.DotChangesFile ## specialize (total time: 0.000s) 0.000s 1 call specialize Wed May 10 02:13:44 UTC 2023 I: diffoscope 242 found no differences in the changes files, and a .buildinfo file also exists. Wed May 10 02:13:44 UTC 2023 I: libconfig-std-perl from bookworm built successfully and reproducibly on arm64. Wed May 10 02:13:47 UTC 2023 I: Submitting .buildinfo files to external archives: Wed May 10 02:13:47 UTC 2023 I: Submitting 8.0K b1/libconfig-std-perl_0.903-3_arm64.buildinfo.asc Wed May 10 02:13:48 UTC 2023 I: Submitting 8.0K b2/libconfig-std-perl_0.903-3_arm64.buildinfo.asc Wed May 10 02:13:49 UTC 2023 I: Done submitting .buildinfo files to http://buildinfo.debian.net/api/submit. Wed May 10 02:13:49 UTC 2023 I: Done submitting .buildinfo files. Wed May 10 02:13:49 UTC 2023 I: Removing signed libconfig-std-perl_0.903-3_arm64.buildinfo.asc files: removed './b1/libconfig-std-perl_0.903-3_arm64.buildinfo.asc' removed './b2/libconfig-std-perl_0.903-3_arm64.buildinfo.asc'