I: pbuilder: network access will be disabled during build I: Current time: Sat Jul 24 21:10:03 +14 2021 I: pbuilder-time-stamp: 1627110603 I: Building the build Environment I: extracting base tarball [/var/cache/pbuilder/bullseye-reproducible-base.tgz] I: copying local configuration I: mounting /proc filesystem I: mounting /sys filesystem I: creating /{dev,run}/shm I: mounting /dev/pts filesystem I: redirecting /dev/ptmx to /dev/pts/ptmx I: policy-rc.d already exists I: Copying source file I: copying [ros-rosinstall_0.7.8-4.dsc] I: copying [./ros-rosinstall_0.7.8.orig.tar.gz] I: copying [./ros-rosinstall_0.7.8-4.debian.tar.xz] I: Extracting source gpgv: unknown type of key resource 'trustedkeys.kbx' gpgv: keyblock resource '/tmp/dpkg-verify-sig.1pkcWQIX/trustedkeys.kbx': General error gpgv: Signature made Sat Sep 28 20:38:37 2019 +14 gpgv: using RSA key 73B299CBD4EEADDCC017E87A5BFFDCC258E69433 gpgv: Can't check signature: No public key dpkg-source: warning: failed to verify signature on ./ros-rosinstall_0.7.8-4.dsc dpkg-source: info: extracting ros-rosinstall in ros-rosinstall-0.7.8 dpkg-source: info: unpacking ros-rosinstall_0.7.8.orig.tar.gz dpkg-source: info: unpacking ros-rosinstall_0.7.8-4.debian.tar.xz dpkg-source: info: using patch list from debian/patches/series dpkg-source: info: applying 0001-Add-default-ROS_ROOT-for-rosbuild.patch dpkg-source: info: applying 0002-Disable-tests-with-network-connection.patch dpkg-source: info: applying 0004-Add-missing-dependency.patch dpkg-source: info: applying 0004-Add-fake-identity-for-VCSs-107.patch dpkg-source: info: applying 0005-Adopt-to-new-get_info_table_raw_csv-API.patch dpkg-source: info: applying 0006-Switch-generated-setup.sh-to-Python-3.patch dpkg-source: info: applying 0007-Disable-test-using-Python-2.patch dpkg-source: info: applying 0008-Fix-Python-3-detection.patch I: Not using root during the build. I: Installing the build-deps I: user script /srv/workspace/pbuilder/26627/tmp/hooks/D01_modify_environment starting debug: Running on cbxi4b. I: Changing host+domainname to test build reproducibility I: Adding a custom variable just for the fun of it... I: Changing /bin/sh to bash Removing 'diversion of /bin/sh to /bin/sh.distrib by dash' Adding 'diversion of /bin/sh to /bin/sh.distrib by bash' Removing 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by dash' Adding 'diversion of /usr/share/man/man1/sh.1.gz to /usr/share/man/man1/sh.distrib.1.gz by bash' I: Setting pbuilder2's login shell to /bin/bash I: Setting pbuilder2's GECOS to second user,second room,second work-phone,second home-phone,second other I: user script /srv/workspace/pbuilder/26627/tmp/hooks/D01_modify_environment finished I: user script /srv/workspace/pbuilder/26627/tmp/hooks/D02_print_environment starting I: set BASH=/bin/sh BASHOPTS=checkwinsize:cmdhist:complete_fullquote:extquote:force_fignore:globasciiranges:hostcomplete:interactive_comments:progcomp:promptvars:sourcepath BASH_ALIASES=() BASH_ARGC=() BASH_ARGV=() BASH_CMDS=() BASH_LINENO=([0]="12" [1]="0") BASH_SOURCE=([0]="/tmp/hooks/D02_print_environment" [1]="/tmp/hooks/D02_print_environment") BASH_VERSINFO=([0]="5" [1]="1" [2]="4" [3]="1" [4]="release" [5]="arm-unknown-linux-gnueabihf") BASH_VERSION='5.1.4(1)-release' BUILDDIR=/build BUILDUSERGECOS='second user,second room,second work-phone,second home-phone,second other' BUILDUSERNAME=pbuilder2 BUILD_ARCH=armhf DEBIAN_FRONTEND=noninteractive DEB_BUILD_OPTIONS='buildinfo=+all reproducible=+all,-fixfilepath parallel=4' DIRSTACK=() DISTRIBUTION= EUID=0 FUNCNAME=([0]="Echo" [1]="main") GROUPS=() HOME=/root HOSTNAME=i-capture-the-hostname HOSTTYPE=arm HOST_ARCH=armhf IFS=' ' INVOCATION_ID=c7d28bfcc1844c7a8fb73bb7256312ac LANG=C LANGUAGE=it_CH:it LC_ALL=C MACHTYPE=arm-unknown-linux-gnueabihf MAIL=/var/mail/root OPTERR=1 OPTIND=1 OSTYPE=linux-gnueabihf PATH=/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path PBCURRENTCOMMANDLINEOPERATION=build PBUILDER_OPERATION=build PBUILDER_PKGDATADIR=/usr/share/pbuilder PBUILDER_PKGLIBDIR=/usr/lib/pbuilder PBUILDER_SYSCONFDIR=/etc PIPESTATUS=([0]="0") POSIXLY_CORRECT=y PPID=26627 PS4='+ ' PWD=/ SHELL=/bin/bash SHELLOPTS=braceexpand:errexit:hashall:interactive-comments:posix SHLVL=3 SUDO_COMMAND='/usr/bin/timeout -k 24.1h 24h /usr/bin/ionice -c 3 /usr/bin/nice -n 11 /usr/bin/unshare --uts -- /usr/sbin/pbuilder --build --configfile /srv/reproducible-results/rbuild-debian/tmp.Zh2usUT3ft/pbuilderrc_3SxV --hookdir /etc/pbuilder/rebuild-hooks --debbuildopts -b --basetgz /var/cache/pbuilder/bullseye-reproducible-base.tgz --buildresult /srv/reproducible-results/rbuild-debian/tmp.Zh2usUT3ft/b2 --logfile b2/build.log --extrapackages usrmerge ros-rosinstall_0.7.8-4.dsc' SUDO_GID=116 SUDO_UID=112 SUDO_USER=jenkins TERM=unknown TZ=/usr/share/zoneinfo/Etc/GMT-14 UID=0 USER=root _='I: set' http_proxy=http://10.0.0.15:8000/ I: uname -a Linux i-capture-the-hostname 5.10.0-8-armmp #1 SMP Debian 5.10.46-2 (2021-07-20) armv7l GNU/Linux I: ls -l /bin total 3580 -rwxr-xr-x 1 root root 816764 Jun 22 16:26 bash -rwxr-xr-x 3 root root 26052 Jul 21 2020 bunzip2 -rwxr-xr-x 3 root root 26052 Jul 21 2020 bzcat lrwxrwxrwx 1 root root 6 Jul 21 2020 bzcmp -> bzdiff -rwxr-xr-x 1 root root 2225 Jul 21 2020 bzdiff lrwxrwxrwx 1 root root 6 Jul 21 2020 bzegrep -> bzgrep -rwxr-xr-x 1 root root 4877 Sep 5 2019 bzexe lrwxrwxrwx 1 root root 6 Jul 21 2020 bzfgrep -> bzgrep -rwxr-xr-x 1 root root 3775 Jul 21 2020 bzgrep -rwxr-xr-x 3 root root 26052 Jul 21 2020 bzip2 -rwxr-xr-x 1 root root 9636 Jul 21 2020 bzip2recover lrwxrwxrwx 1 root root 6 Jul 21 2020 bzless -> bzmore -rwxr-xr-x 1 root root 1297 Jul 21 2020 bzmore -rwxr-xr-x 1 root root 26668 Sep 23 2020 cat -rwxr-xr-x 1 root root 43104 Sep 23 2020 chgrp -rwxr-xr-x 1 root root 38984 Sep 23 2020 chmod -rwxr-xr-x 1 root root 43112 Sep 23 2020 chown -rwxr-xr-x 1 root root 92616 Sep 23 2020 cp -rwxr-xr-x 1 root root 75524 Dec 11 2020 dash -rwxr-xr-x 1 root root 75880 Sep 23 2020 date -rwxr-xr-x 1 root root 55436 Sep 23 2020 dd -rwxr-xr-x 1 root root 59912 Sep 23 2020 df -rwxr-xr-x 1 root root 96764 Sep 23 2020 dir -rwxr-xr-x 1 root root 55012 Feb 8 04:38 dmesg lrwxrwxrwx 1 root root 8 Nov 8 2019 dnsdomainname -> hostname lrwxrwxrwx 1 root root 8 Nov 8 2019 domainname -> hostname -rwxr-xr-x 1 root root 22508 Sep 23 2020 echo -rwxr-xr-x 1 root root 28 Nov 10 2020 egrep -rwxr-xr-x 1 root root 22496 Sep 23 2020 false -rwxr-xr-x 1 root root 28 Nov 10 2020 fgrep -rwxr-xr-x 1 root root 47492 Feb 8 04:38 findmnt -rwsr-xr-x 1 root root 26076 Feb 27 06:12 fusermount -rwxr-xr-x 1 root root 124508 Nov 10 2020 grep -rwxr-xr-x 2 root root 2346 Mar 3 13:30 gunzip -rwxr-xr-x 1 root root 6376 Mar 3 13:30 gzexe -rwxr-xr-x 1 root root 64212 Mar 3 13:30 gzip -rwxr-xr-x 1 root root 13784 Nov 8 2019 hostname -rwxr-xr-x 1 root root 43180 Sep 23 2020 ln -rwxr-xr-x 1 root root 35068 Feb 8 2020 login -rwxr-xr-x 1 root root 96764 Sep 23 2020 ls -rwxr-xr-x 1 root root 99940 Feb 8 04:38 lsblk -rwxr-xr-x 1 root root 51408 Sep 23 2020 mkdir -rwxr-xr-x 1 root root 43184 Sep 23 2020 mknod -rwxr-xr-x 1 root root 30780 Sep 23 2020 mktemp -rwxr-xr-x 1 root root 34408 Feb 8 04:38 more -rwsr-xr-x 1 root root 34400 Feb 8 04:38 mount -rwxr-xr-x 1 root root 9824 Feb 8 04:38 mountpoint -rwxr-xr-x 1 root root 88524 Sep 23 2020 mv lrwxrwxrwx 1 root root 8 Nov 8 2019 nisdomainname -> hostname lrwxrwxrwx 1 root root 14 Apr 19 05:38 pidof -> /sbin/killall5 -rwxr-xr-x 1 root root 26652 Sep 23 2020 pwd lrwxrwxrwx 1 root root 4 Jun 22 16:26 rbash -> bash -rwxr-xr-x 1 root root 30740 Sep 23 2020 readlink -rwxr-xr-x 1 root root 43104 Sep 23 2020 rm -rwxr-xr-x 1 root root 30732 Sep 23 2020 rmdir -rwxr-xr-x 1 root root 14144 Sep 28 2020 run-parts -rwxr-xr-x 1 root root 76012 Dec 23 2018 sed lrwxrwxrwx 1 root root 4 Jul 24 21:11 sh -> bash lrwxrwxrwx 1 root root 4 Jul 21 23:29 sh.distrib -> dash -rwxr-xr-x 1 root root 22532 Sep 23 2020 sleep -rwxr-xr-x 1 root root 55360 Sep 23 2020 stty -rwsr-xr-x 1 root root 46704 Feb 8 04:38 su -rwxr-xr-x 1 root root 22532 Sep 23 2020 sync -rwxr-xr-x 1 root root 340872 Feb 17 23:55 tar -rwxr-xr-x 1 root root 9808 Sep 28 2020 tempfile -rwxr-xr-x 1 root root 67696 Sep 23 2020 touch -rwxr-xr-x 1 root root 22496 Sep 23 2020 true -rwxr-xr-x 1 root root 9636 Feb 27 06:12 ulockmgr_server -rwsr-xr-x 1 root root 22108 Feb 8 04:38 umount -rwxr-xr-x 1 root root 22520 Sep 23 2020 uname -rwxr-xr-x 2 root root 2346 Mar 3 13:30 uncompress -rwxr-xr-x 1 root root 96764 Sep 23 2020 vdir -rwxr-xr-x 1 root root 38512 Feb 8 04:38 wdctl lrwxrwxrwx 1 root root 8 Nov 8 2019 ypdomainname -> hostname -rwxr-xr-x 1 root root 1984 Mar 3 13:30 zcat -rwxr-xr-x 1 root root 1678 Mar 3 13:30 zcmp -rwxr-xr-x 1 root root 5880 Mar 3 13:30 zdiff -rwxr-xr-x 1 root root 29 Mar 3 13:30 zegrep -rwxr-xr-x 1 root root 29 Mar 3 13:30 zfgrep -rwxr-xr-x 1 root root 2081 Mar 3 13:30 zforce -rwxr-xr-x 1 root root 7585 Mar 3 13:30 zgrep -rwxr-xr-x 1 root root 2206 Mar 3 13:30 zless -rwxr-xr-x 1 root root 1842 Mar 3 13:30 zmore -rwxr-xr-x 1 root root 4553 Mar 3 13:30 znew I: user script /srv/workspace/pbuilder/26627/tmp/hooks/D02_print_environment finished -> Attempting to satisfy build-dependencies -> Creating pbuilder-satisfydepends-dummy package Package: pbuilder-satisfydepends-dummy Version: 0.invalid.0 Architecture: armhf Maintainer: Debian Pbuilder Team Description: Dummy package to satisfy dependencies with aptitude - created by pbuilder This package was created automatically by pbuilder to satisfy the build-dependencies of the package being currently built. Depends: debhelper-compat (= 12), dh-python, python3-all, python3-setuptools, git, mercurial, zsh, python3-wstool, python3-yaml, python3-mock, python3-catkin-pkg, python3-rosdistro dpkg-deb: building package 'pbuilder-satisfydepends-dummy' in '/tmp/satisfydepends-aptitude/pbuilder-satisfydepends-dummy.deb'. Selecting previously unselected package pbuilder-satisfydepends-dummy. (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../pbuilder-satisfydepends-dummy.deb ... Unpacking pbuilder-satisfydepends-dummy (0.invalid.0) ... dpkg: pbuilder-satisfydepends-dummy: dependency problems, but configuring anyway as you requested: pbuilder-satisfydepends-dummy depends on debhelper-compat (= 12); however: Package debhelper-compat is not installed. pbuilder-satisfydepends-dummy depends on dh-python; however: Package dh-python is not installed. pbuilder-satisfydepends-dummy depends on python3-all; however: Package python3-all is not installed. pbuilder-satisfydepends-dummy depends on python3-setuptools; however: Package python3-setuptools is not installed. pbuilder-satisfydepends-dummy depends on git; however: Package git is not installed. pbuilder-satisfydepends-dummy depends on mercurial; however: Package mercurial is not installed. pbuilder-satisfydepends-dummy depends on zsh; however: Package zsh is not installed. pbuilder-satisfydepends-dummy depends on python3-wstool; however: Package python3-wstool is not installed. pbuilder-satisfydepends-dummy depends on python3-yaml; however: Package python3-yaml is not installed. pbuilder-satisfydepends-dummy depends on python3-mock; however: Package python3-mock is not installed. pbuilder-satisfydepends-dummy depends on python3-catkin-pkg; however: Package python3-catkin-pkg is not installed. pbuilder-satisfydepends-dummy depends on python3-rosdistro; however: Package python3-rosdistro is not installed. Setting up pbuilder-satisfydepends-dummy (0.invalid.0) ... Reading package lists... Building dependency tree... Reading state information... Initializing package states... Writing extended state information... Building tag database... pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) pbuilder-satisfydepends-dummy is already installed at the requested version (0.invalid.0) The following NEW packages will be installed: autoconf{a} automake{a} autopoint{a} autotools-dev{a} bsdextrautils{a} debhelper{a} dh-autoreconf{a} dh-python{a} dh-strip-nondeterminism{a} distro-info-data{a} docutils-common{a} dwz{a} file{a} gettext{a} gettext-base{a} git{a} git-man{a} groff-base{a} intltool-debian{a} libarchive-zip-perl{a} libbrotli1{a} libcap2{a} libcurl3-gnutls{a} libdebhelper-perl{a} libelf1{a} liberror-perl{a} libexpat1{a} libfile-stripnondeterminism-perl{a} libicu67{a} libldap-2.4-2{a} libmagic-mgc{a} libmagic1{a} libmpdec3{a} libnghttp2-14{a} libpipeline1{a} libpsl5{a} libpython3-stdlib{a} libpython3.9-minimal{a} libpython3.9-stdlib{a} libreadline8{a} librtmp1{a} libsasl2-2{a} libsasl2-modules-db{a} libsigsegv2{a} libssh2-1{a} libsub-override-perl{a} libtool{a} libuchardet0{a} libxml2{a} libyaml-0-2{a} lsb-release{a} m4{a} man-db{a} media-types{a} mercurial{a} mercurial-common{a} po-debconf{a} python3{a} python3-all{a} python3-catkin-pkg{a} python3-dateutil{a} python3-distro{a} python3-distutils{a} python3-docutils{a} python3-lib2to3{a} python3-minimal{a} python3-mock{a} python3-pbr{a} python3-pkg-resources{a} python3-pyparsing{a} python3-roman{a} python3-rosdistro{a} python3-rospkg{a} python3-setuptools{a} python3-six{a} python3-vcstools{a} python3-wstool{a} python3-yaml{a} python3.9{a} python3.9-minimal{a} readline-common{a} sensible-utils{a} sgml-base{a} ucf{a} xml-core{a} zsh{a} zsh-common{a} The following packages are RECOMMENDED but will NOT be installed: brz bzr ca-certificates curl less libarchive-cpio-perl libldap-common libltdl-dev libmail-sendmail-perl libpaper-utils libsasl2-modules lynx openssh-client publicsuffix python3-pil python3-pygments subversion wget 0 packages upgraded, 87 newly installed, 0 to remove and 0 not upgraded. Need to get 41.0 MB of archives. After unpacking 155 MB will be used. Writing extended state information... Get: 1 http://deb.debian.org/debian bullseye/main armhf bsdextrautils armhf 2.36.1-7 [138 kB] Get: 2 http://deb.debian.org/debian bullseye/main armhf libuchardet0 armhf 0.0.7-1 [65.0 kB] Get: 3 http://deb.debian.org/debian bullseye/main armhf groff-base armhf 1.22.4-6 [847 kB] Get: 4 http://deb.debian.org/debian bullseye/main armhf libpipeline1 armhf 1.5.3-1 [30.1 kB] Get: 5 http://deb.debian.org/debian bullseye/main armhf man-db armhf 2.9.4-2 [1319 kB] Get: 6 http://deb.debian.org/debian bullseye/main armhf libpython3.9-minimal armhf 3.9.2-1 [790 kB] Get: 7 http://deb.debian.org/debian bullseye/main armhf libexpat1 armhf 2.2.10-2 [76.3 kB] Get: 8 http://deb.debian.org/debian bullseye/main armhf python3.9-minimal armhf 3.9.2-1 [1630 kB] Get: 9 http://deb.debian.org/debian bullseye/main armhf python3-minimal armhf 3.9.2-3 [38.2 kB] Get: 10 http://deb.debian.org/debian bullseye/main armhf media-types all 4.0.0 [30.3 kB] Get: 11 http://deb.debian.org/debian bullseye/main armhf libmpdec3 armhf 2.5.1-1 [74.9 kB] Get: 12 http://deb.debian.org/debian bullseye/main armhf readline-common all 8.1-1 [73.7 kB] Get: 13 http://deb.debian.org/debian bullseye/main armhf libreadline8 armhf 8.1-1 [147 kB] Get: 14 http://deb.debian.org/debian bullseye/main armhf libpython3.9-stdlib armhf 3.9.2-1 [1608 kB] Get: 15 http://deb.debian.org/debian bullseye/main armhf python3.9 armhf 3.9.2-1 [466 kB] Get: 16 http://deb.debian.org/debian bullseye/main armhf libpython3-stdlib armhf 3.9.2-3 [21.4 kB] Get: 17 http://deb.debian.org/debian bullseye/main armhf python3 armhf 3.9.2-3 [37.9 kB] Get: 18 http://deb.debian.org/debian bullseye/main armhf sgml-base all 1.30 [15.1 kB] Get: 19 http://deb.debian.org/debian bullseye/main armhf sensible-utils all 0.0.14 [14.8 kB] Get: 20 http://deb.debian.org/debian bullseye/main armhf libmagic-mgc armhf 1:5.39-3 [273 kB] Get: 21 http://deb.debian.org/debian bullseye/main armhf libmagic1 armhf 1:5.39-3 [117 kB] Get: 22 http://deb.debian.org/debian bullseye/main armhf file armhf 1:5.39-3 [68.1 kB] Get: 23 http://deb.debian.org/debian bullseye/main armhf gettext-base armhf 0.21-4 [171 kB] Get: 24 http://deb.debian.org/debian bullseye/main armhf ucf all 3.0043 [74.0 kB] Get: 25 http://deb.debian.org/debian bullseye/main armhf libsigsegv2 armhf 2.13-1 [34.0 kB] Get: 26 http://deb.debian.org/debian bullseye/main armhf m4 armhf 1.4.18-5 [192 kB] Get: 27 http://deb.debian.org/debian bullseye/main armhf autoconf all 2.69-14 [313 kB] Get: 28 http://deb.debian.org/debian bullseye/main armhf autotools-dev all 20180224.1+nmu1 [77.1 kB] Get: 29 http://deb.debian.org/debian bullseye/main armhf automake all 1:1.16.3-2 [814 kB] Get: 30 http://deb.debian.org/debian bullseye/main armhf autopoint all 0.21-4 [510 kB] Get: 31 http://deb.debian.org/debian bullseye/main armhf libdebhelper-perl all 13.3.4 [189 kB] Get: 32 http://deb.debian.org/debian bullseye/main armhf libtool all 2.4.6-15 [513 kB] Get: 33 http://deb.debian.org/debian bullseye/main armhf dh-autoreconf all 20 [17.1 kB] Get: 34 http://deb.debian.org/debian bullseye/main armhf libarchive-zip-perl all 1.68-1 [104 kB] Get: 35 http://deb.debian.org/debian bullseye/main armhf libsub-override-perl all 0.09-2 [10.2 kB] Get: 36 http://deb.debian.org/debian bullseye/main armhf libfile-stripnondeterminism-perl all 1.12.0-1 [26.3 kB] Get: 37 http://deb.debian.org/debian bullseye/main armhf dh-strip-nondeterminism all 1.12.0-1 [15.4 kB] Get: 38 http://deb.debian.org/debian bullseye/main armhf libelf1 armhf 0.183-1 [161 kB] Get: 39 http://deb.debian.org/debian bullseye/main armhf dwz armhf 0.13+20210201-1 [179 kB] Get: 40 http://deb.debian.org/debian bullseye/main armhf libicu67 armhf 67.1-7 [8319 kB] Get: 41 http://deb.debian.org/debian bullseye/main armhf libxml2 armhf 2.9.10+dfsg-6.7 [602 kB] Get: 42 http://deb.debian.org/debian bullseye/main armhf gettext armhf 0.21-4 [1243 kB] Get: 43 http://deb.debian.org/debian bullseye/main armhf intltool-debian all 0.35.0+20060710.5 [26.8 kB] Get: 44 http://deb.debian.org/debian bullseye/main armhf po-debconf all 1.0.21+nmu1 [248 kB] Get: 45 http://deb.debian.org/debian bullseye/main armhf debhelper all 13.3.4 [1049 kB] Get: 46 http://deb.debian.org/debian bullseye/main armhf python3-lib2to3 all 3.9.2-1 [77.8 kB] Get: 47 http://deb.debian.org/debian bullseye/main armhf python3-distutils all 3.9.2-1 [143 kB] Get: 48 http://deb.debian.org/debian bullseye/main armhf dh-python all 4.20201102+nmu1 [99.4 kB] Get: 49 http://deb.debian.org/debian bullseye/main armhf distro-info-data all 0.50 [7460 B] Get: 50 http://deb.debian.org/debian bullseye/main armhf xml-core all 0.18+nmu1 [23.8 kB] Get: 51 http://deb.debian.org/debian bullseye/main armhf docutils-common all 0.16+dfsg-4 [129 kB] Get: 52 http://deb.debian.org/debian bullseye/main armhf libbrotli1 armhf 1.0.9-2+b2 [262 kB] Get: 53 http://deb.debian.org/debian bullseye/main armhf libsasl2-modules-db armhf 2.1.27+dfsg-2.1 [67.6 kB] Get: 54 http://deb.debian.org/debian bullseye/main armhf libsasl2-2 armhf 2.1.27+dfsg-2.1 [99.1 kB] Get: 55 http://deb.debian.org/debian bullseye/main armhf libldap-2.4-2 armhf 2.4.57+dfsg-3 [210 kB] Get: 56 http://deb.debian.org/debian bullseye/main armhf libnghttp2-14 armhf 1.43.0-1 [65.6 kB] Get: 57 http://deb.debian.org/debian bullseye/main armhf libpsl5 armhf 0.21.0-1.2 [56.1 kB] Get: 58 http://deb.debian.org/debian bullseye/main armhf librtmp1 armhf 2.4+20151223.gitfa8646d.1-2+b2 [55.2 kB] Get: 59 http://deb.debian.org/debian bullseye/main armhf libssh2-1 armhf 1.9.0-2 [143 kB] Get: 60 http://deb.debian.org/debian bullseye/main armhf libcurl3-gnutls armhf 7.74.0-1.3+b1 [306 kB] Get: 61 http://deb.debian.org/debian bullseye/main armhf liberror-perl all 0.17029-1 [31.0 kB] Get: 62 http://deb.debian.org/debian bullseye/main armhf git-man all 1:2.30.2-1 [1827 kB] Get: 63 http://deb.debian.org/debian bullseye/main armhf git armhf 1:2.30.2-1 [5128 kB] Get: 64 http://deb.debian.org/debian bullseye/main armhf libcap2 armhf 1:2.44-1 [21.2 kB] Get: 65 http://deb.debian.org/debian bullseye/main armhf libyaml-0-2 armhf 0.2.2-1 [42.0 kB] Get: 66 http://deb.debian.org/debian bullseye/main armhf lsb-release all 11.1.0 [27.9 kB] Get: 67 http://deb.debian.org/debian bullseye/main armhf mercurial-common all 5.6.1-4 [2726 kB] Get: 68 http://deb.debian.org/debian bullseye/main armhf mercurial armhf 5.6.1-4 [307 kB] Get: 69 http://deb.debian.org/debian bullseye/main armhf python3-all armhf 3.9.2-3 [1056 B] Get: 70 http://deb.debian.org/debian bullseye/main armhf python3-six all 1.16.0-1 [17.1 kB] Get: 71 http://deb.debian.org/debian bullseye/main armhf python3-dateutil all 2.8.1-5 [81.7 kB] Get: 72 http://deb.debian.org/debian bullseye/main armhf python3-roman all 2.0.0-5 [9064 B] Get: 73 http://deb.debian.org/debian bullseye/main armhf python3-docutils all 0.16+dfsg-4 [384 kB] Get: 74 http://deb.debian.org/debian bullseye/main armhf python3-pyparsing all 2.4.7-1 [109 kB] Get: 75 http://deb.debian.org/debian bullseye/main armhf python3-pkg-resources all 52.0.0-4 [190 kB] Get: 76 http://deb.debian.org/debian bullseye/main armhf python3-catkin-pkg all 0.4.23-1 [46.9 kB] Get: 77 http://deb.debian.org/debian bullseye/main armhf python3-distro all 1.5.0-1 [17.1 kB] Get: 78 http://deb.debian.org/debian bullseye/main armhf python3-setuptools all 52.0.0-4 [366 kB] Get: 79 http://deb.debian.org/debian bullseye/main armhf python3-pbr all 5.5.0-2 [60.4 kB] Get: 80 http://deb.debian.org/debian bullseye/main armhf python3-mock all 4.0.3-1 [34.6 kB] Get: 81 http://deb.debian.org/debian bullseye/main armhf python3-yaml armhf 5.3.1-5 [129 kB] Get: 82 http://deb.debian.org/debian bullseye/main armhf python3-rospkg all 1.2.9-1 [26.0 kB] Get: 83 http://deb.debian.org/debian bullseye/main armhf python3-rosdistro all 0.8.3-1 [36.0 kB] Get: 84 http://deb.debian.org/debian bullseye/main armhf python3-vcstools all 0.1.42-3 [33.7 kB] Get: 85 http://deb.debian.org/debian bullseye/main armhf python3-wstool all 0.1.18-2 [40.1 kB] Get: 86 http://deb.debian.org/debian bullseye/main armhf zsh-common all 5.8-6 [3940 kB] Get: 87 http://deb.debian.org/debian bullseye/main armhf zsh armhf 5.8-6+b1 [815 kB] Fetched 41.0 MB in 11s (3607 kB/s) debconf: delaying package configuration, since apt-utils is not installed Selecting previously unselected package bsdextrautils. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19398 files and directories currently installed.) Preparing to unpack .../0-bsdextrautils_2.36.1-7_armhf.deb ... Unpacking bsdextrautils (2.36.1-7) ... Selecting previously unselected package libuchardet0:armhf. Preparing to unpack .../1-libuchardet0_0.0.7-1_armhf.deb ... Unpacking libuchardet0:armhf (0.0.7-1) ... Selecting previously unselected package groff-base. Preparing to unpack .../2-groff-base_1.22.4-6_armhf.deb ... Unpacking groff-base (1.22.4-6) ... Selecting previously unselected package libpipeline1:armhf. Preparing to unpack .../3-libpipeline1_1.5.3-1_armhf.deb ... Unpacking libpipeline1:armhf (1.5.3-1) ... Selecting previously unselected package man-db. Preparing to unpack .../4-man-db_2.9.4-2_armhf.deb ... Unpacking man-db (2.9.4-2) ... Selecting previously unselected package libpython3.9-minimal:armhf. Preparing to unpack .../5-libpython3.9-minimal_3.9.2-1_armhf.deb ... Unpacking libpython3.9-minimal:armhf (3.9.2-1) ... Selecting previously unselected package libexpat1:armhf. Preparing to unpack .../6-libexpat1_2.2.10-2_armhf.deb ... Unpacking libexpat1:armhf (2.2.10-2) ... Selecting previously unselected package python3.9-minimal. Preparing to unpack .../7-python3.9-minimal_3.9.2-1_armhf.deb ... Unpacking python3.9-minimal (3.9.2-1) ... Setting up libpython3.9-minimal:armhf (3.9.2-1) ... Setting up libexpat1:armhf (2.2.10-2) ... Setting up python3.9-minimal (3.9.2-1) ... Selecting previously unselected package python3-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20265 files and directories currently installed.) Preparing to unpack .../0-python3-minimal_3.9.2-3_armhf.deb ... Unpacking python3-minimal (3.9.2-3) ... Selecting previously unselected package media-types. Preparing to unpack .../1-media-types_4.0.0_all.deb ... Unpacking media-types (4.0.0) ... Selecting previously unselected package libmpdec3:armhf. Preparing to unpack .../2-libmpdec3_2.5.1-1_armhf.deb ... Unpacking libmpdec3:armhf (2.5.1-1) ... Selecting previously unselected package readline-common. Preparing to unpack .../3-readline-common_8.1-1_all.deb ... Unpacking readline-common (8.1-1) ... Selecting previously unselected package libreadline8:armhf. Preparing to unpack .../4-libreadline8_8.1-1_armhf.deb ... Unpacking libreadline8:armhf (8.1-1) ... Selecting previously unselected package libpython3.9-stdlib:armhf. Preparing to unpack .../5-libpython3.9-stdlib_3.9.2-1_armhf.deb ... Unpacking libpython3.9-stdlib:armhf (3.9.2-1) ... Selecting previously unselected package python3.9. Preparing to unpack .../6-python3.9_3.9.2-1_armhf.deb ... Unpacking python3.9 (3.9.2-1) ... Selecting previously unselected package libpython3-stdlib:armhf. Preparing to unpack .../7-libpython3-stdlib_3.9.2-3_armhf.deb ... Unpacking libpython3-stdlib:armhf (3.9.2-3) ... Setting up python3-minimal (3.9.2-3) ... Selecting previously unselected package python3. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 20686 files and directories currently installed.) Preparing to unpack .../00-python3_3.9.2-3_armhf.deb ... Unpacking python3 (3.9.2-3) ... Selecting previously unselected package sgml-base. Preparing to unpack .../01-sgml-base_1.30_all.deb ... Unpacking sgml-base (1.30) ... Selecting previously unselected package sensible-utils. Preparing to unpack .../02-sensible-utils_0.0.14_all.deb ... Unpacking sensible-utils (0.0.14) ... Selecting previously unselected package libmagic-mgc. Preparing to unpack .../03-libmagic-mgc_1%3a5.39-3_armhf.deb ... Unpacking libmagic-mgc (1:5.39-3) ... Selecting previously unselected package libmagic1:armhf. Preparing to unpack .../04-libmagic1_1%3a5.39-3_armhf.deb ... Unpacking libmagic1:armhf (1:5.39-3) ... Selecting previously unselected package file. Preparing to unpack .../05-file_1%3a5.39-3_armhf.deb ... Unpacking file (1:5.39-3) ... Selecting previously unselected package gettext-base. Preparing to unpack .../06-gettext-base_0.21-4_armhf.deb ... Unpacking gettext-base (0.21-4) ... Selecting previously unselected package ucf. Preparing to unpack .../07-ucf_3.0043_all.deb ... Moving old data out of the way Unpacking ucf (3.0043) ... Selecting previously unselected package libsigsegv2:armhf. Preparing to unpack .../08-libsigsegv2_2.13-1_armhf.deb ... Unpacking libsigsegv2:armhf (2.13-1) ... Selecting previously unselected package m4. Preparing to unpack .../09-m4_1.4.18-5_armhf.deb ... Unpacking m4 (1.4.18-5) ... Selecting previously unselected package autoconf. Preparing to unpack .../10-autoconf_2.69-14_all.deb ... Unpacking autoconf (2.69-14) ... Selecting previously unselected package autotools-dev. Preparing to unpack .../11-autotools-dev_20180224.1+nmu1_all.deb ... Unpacking autotools-dev (20180224.1+nmu1) ... Selecting previously unselected package automake. Preparing to unpack .../12-automake_1%3a1.16.3-2_all.deb ... Unpacking automake (1:1.16.3-2) ... Selecting previously unselected package autopoint. Preparing to unpack .../13-autopoint_0.21-4_all.deb ... Unpacking autopoint (0.21-4) ... Selecting previously unselected package libdebhelper-perl. Preparing to unpack .../14-libdebhelper-perl_13.3.4_all.deb ... Unpacking libdebhelper-perl (13.3.4) ... Selecting previously unselected package libtool. Preparing to unpack .../15-libtool_2.4.6-15_all.deb ... Unpacking libtool (2.4.6-15) ... Selecting previously unselected package dh-autoreconf. Preparing to unpack .../16-dh-autoreconf_20_all.deb ... Unpacking dh-autoreconf (20) ... Selecting previously unselected package libarchive-zip-perl. Preparing to unpack .../17-libarchive-zip-perl_1.68-1_all.deb ... Unpacking libarchive-zip-perl (1.68-1) ... Selecting previously unselected package libsub-override-perl. Preparing to unpack .../18-libsub-override-perl_0.09-2_all.deb ... Unpacking libsub-override-perl (0.09-2) ... Selecting previously unselected package libfile-stripnondeterminism-perl. Preparing to unpack .../19-libfile-stripnondeterminism-perl_1.12.0-1_all.deb ... Unpacking libfile-stripnondeterminism-perl (1.12.0-1) ... Selecting previously unselected package dh-strip-nondeterminism. Preparing to unpack .../20-dh-strip-nondeterminism_1.12.0-1_all.deb ... Unpacking dh-strip-nondeterminism (1.12.0-1) ... Selecting previously unselected package libelf1:armhf. Preparing to unpack .../21-libelf1_0.183-1_armhf.deb ... Unpacking libelf1:armhf (0.183-1) ... Selecting previously unselected package dwz. Preparing to unpack .../22-dwz_0.13+20210201-1_armhf.deb ... Unpacking dwz (0.13+20210201-1) ... Selecting previously unselected package libicu67:armhf. Preparing to unpack .../23-libicu67_67.1-7_armhf.deb ... Unpacking libicu67:armhf (67.1-7) ... Selecting previously unselected package libxml2:armhf. Preparing to unpack .../24-libxml2_2.9.10+dfsg-6.7_armhf.deb ... Unpacking libxml2:armhf (2.9.10+dfsg-6.7) ... Selecting previously unselected package gettext. Preparing to unpack .../25-gettext_0.21-4_armhf.deb ... Unpacking gettext (0.21-4) ... Selecting previously unselected package intltool-debian. Preparing to unpack .../26-intltool-debian_0.35.0+20060710.5_all.deb ... Unpacking intltool-debian (0.35.0+20060710.5) ... Selecting previously unselected package po-debconf. Preparing to unpack .../27-po-debconf_1.0.21+nmu1_all.deb ... Unpacking po-debconf (1.0.21+nmu1) ... Selecting previously unselected package debhelper. Preparing to unpack .../28-debhelper_13.3.4_all.deb ... Unpacking debhelper (13.3.4) ... Selecting previously unselected package python3-lib2to3. Preparing to unpack .../29-python3-lib2to3_3.9.2-1_all.deb ... Unpacking python3-lib2to3 (3.9.2-1) ... Selecting previously unselected package python3-distutils. Preparing to unpack .../30-python3-distutils_3.9.2-1_all.deb ... Unpacking python3-distutils (3.9.2-1) ... Selecting previously unselected package dh-python. Preparing to unpack .../31-dh-python_4.20201102+nmu1_all.deb ... Unpacking dh-python (4.20201102+nmu1) ... Selecting previously unselected package distro-info-data. Preparing to unpack .../32-distro-info-data_0.50_all.deb ... Unpacking distro-info-data (0.50) ... Selecting previously unselected package xml-core. Preparing to unpack .../33-xml-core_0.18+nmu1_all.deb ... Unpacking xml-core (0.18+nmu1) ... Selecting previously unselected package docutils-common. Preparing to unpack .../34-docutils-common_0.16+dfsg-4_all.deb ... Unpacking docutils-common (0.16+dfsg-4) ... Selecting previously unselected package libbrotli1:armhf. Preparing to unpack .../35-libbrotli1_1.0.9-2+b2_armhf.deb ... Unpacking libbrotli1:armhf (1.0.9-2+b2) ... Selecting previously unselected package libsasl2-modules-db:armhf. Preparing to unpack .../36-libsasl2-modules-db_2.1.27+dfsg-2.1_armhf.deb ... Unpacking libsasl2-modules-db:armhf (2.1.27+dfsg-2.1) ... Selecting previously unselected package libsasl2-2:armhf. Preparing to unpack .../37-libsasl2-2_2.1.27+dfsg-2.1_armhf.deb ... Unpacking libsasl2-2:armhf (2.1.27+dfsg-2.1) ... Selecting previously unselected package libldap-2.4-2:armhf. Preparing to unpack .../38-libldap-2.4-2_2.4.57+dfsg-3_armhf.deb ... Unpacking libldap-2.4-2:armhf (2.4.57+dfsg-3) ... Selecting previously unselected package libnghttp2-14:armhf. Preparing to unpack .../39-libnghttp2-14_1.43.0-1_armhf.deb ... Unpacking libnghttp2-14:armhf (1.43.0-1) ... Selecting previously unselected package libpsl5:armhf. Preparing to unpack .../40-libpsl5_0.21.0-1.2_armhf.deb ... Unpacking libpsl5:armhf (0.21.0-1.2) ... Selecting previously unselected package librtmp1:armhf. Preparing to unpack .../41-librtmp1_2.4+20151223.gitfa8646d.1-2+b2_armhf.deb ... Unpacking librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b2) ... Selecting previously unselected package libssh2-1:armhf. Preparing to unpack .../42-libssh2-1_1.9.0-2_armhf.deb ... Unpacking libssh2-1:armhf (1.9.0-2) ... Selecting previously unselected package libcurl3-gnutls:armhf. Preparing to unpack .../43-libcurl3-gnutls_7.74.0-1.3+b1_armhf.deb ... Unpacking libcurl3-gnutls:armhf (7.74.0-1.3+b1) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../44-liberror-perl_0.17029-1_all.deb ... Unpacking liberror-perl (0.17029-1) ... Selecting previously unselected package git-man. Preparing to unpack .../45-git-man_1%3a2.30.2-1_all.deb ... Unpacking git-man (1:2.30.2-1) ... Selecting previously unselected package git. Preparing to unpack .../46-git_1%3a2.30.2-1_armhf.deb ... Unpacking git (1:2.30.2-1) ... Selecting previously unselected package libcap2:armhf. Preparing to unpack .../47-libcap2_1%3a2.44-1_armhf.deb ... Unpacking libcap2:armhf (1:2.44-1) ... Selecting previously unselected package libyaml-0-2:armhf. Preparing to unpack .../48-libyaml-0-2_0.2.2-1_armhf.deb ... Unpacking libyaml-0-2:armhf (0.2.2-1) ... Selecting previously unselected package lsb-release. Preparing to unpack .../49-lsb-release_11.1.0_all.deb ... Unpacking lsb-release (11.1.0) ... Selecting previously unselected package mercurial-common. Preparing to unpack .../50-mercurial-common_5.6.1-4_all.deb ... Unpacking mercurial-common (5.6.1-4) ... Selecting previously unselected package mercurial. Preparing to unpack .../51-mercurial_5.6.1-4_armhf.deb ... Unpacking mercurial (5.6.1-4) ... Selecting previously unselected package python3-all. Preparing to unpack .../52-python3-all_3.9.2-3_armhf.deb ... Unpacking python3-all (3.9.2-3) ... Selecting previously unselected package python3-six. Preparing to unpack .../53-python3-six_1.16.0-1_all.deb ... Unpacking python3-six (1.16.0-1) ... Selecting previously unselected package python3-dateutil. Preparing to unpack .../54-python3-dateutil_2.8.1-5_all.deb ... Unpacking python3-dateutil (2.8.1-5) ... Selecting previously unselected package python3-roman. Preparing to unpack .../55-python3-roman_2.0.0-5_all.deb ... Unpacking python3-roman (2.0.0-5) ... Selecting previously unselected package python3-docutils. Preparing to unpack .../56-python3-docutils_0.16+dfsg-4_all.deb ... Unpacking python3-docutils (0.16+dfsg-4) ... Selecting previously unselected package python3-pyparsing. Preparing to unpack .../57-python3-pyparsing_2.4.7-1_all.deb ... Unpacking python3-pyparsing (2.4.7-1) ... Selecting previously unselected package python3-pkg-resources. Preparing to unpack .../58-python3-pkg-resources_52.0.0-4_all.deb ... Unpacking python3-pkg-resources (52.0.0-4) ... Selecting previously unselected package python3-catkin-pkg. Preparing to unpack .../59-python3-catkin-pkg_0.4.23-1_all.deb ... Unpacking python3-catkin-pkg (0.4.23-1) ... Selecting previously unselected package python3-distro. Preparing to unpack .../60-python3-distro_1.5.0-1_all.deb ... Unpacking python3-distro (1.5.0-1) ... Selecting previously unselected package python3-setuptools. Preparing to unpack .../61-python3-setuptools_52.0.0-4_all.deb ... Unpacking python3-setuptools (52.0.0-4) ... Selecting previously unselected package python3-pbr. Preparing to unpack .../62-python3-pbr_5.5.0-2_all.deb ... Unpacking python3-pbr (5.5.0-2) ... Selecting previously unselected package python3-mock. Preparing to unpack .../63-python3-mock_4.0.3-1_all.deb ... Unpacking python3-mock (4.0.3-1) ... Selecting previously unselected package python3-yaml. Preparing to unpack .../64-python3-yaml_5.3.1-5_armhf.deb ... Unpacking python3-yaml (5.3.1-5) ... Selecting previously unselected package python3-rospkg. Preparing to unpack .../65-python3-rospkg_1.2.9-1_all.deb ... Unpacking python3-rospkg (1.2.9-1) ... Selecting previously unselected package python3-rosdistro. Preparing to unpack .../66-python3-rosdistro_0.8.3-1_all.deb ... Unpacking python3-rosdistro (0.8.3-1) ... Selecting previously unselected package python3-vcstools. Preparing to unpack .../67-python3-vcstools_0.1.42-3_all.deb ... Unpacking python3-vcstools (0.1.42-3) ... Selecting previously unselected package python3-wstool. Preparing to unpack .../68-python3-wstool_0.1.18-2_all.deb ... Unpacking python3-wstool (0.1.18-2) ... Selecting previously unselected package zsh-common. Preparing to unpack .../69-zsh-common_5.8-6_all.deb ... Unpacking zsh-common (5.8-6) ... Selecting previously unselected package zsh. Preparing to unpack .../70-zsh_5.8-6+b1_armhf.deb ... Unpacking zsh (5.8-6+b1) ... Setting up media-types (4.0.0) ... Setting up libpipeline1:armhf (1.5.3-1) ... Setting up libpsl5:armhf (0.21.0-1.2) ... Setting up bsdextrautils (2.36.1-7) ... update-alternatives: using /usr/bin/write.ul to provide /usr/bin/write (write) in auto mode Setting up libicu67:armhf (67.1-7) ... Setting up libmagic-mgc (1:5.39-3) ... Setting up zsh-common (5.8-6) ... Setting up libarchive-zip-perl (1.68-1) ... Setting up libyaml-0-2:armhf (0.2.2-1) ... Setting up distro-info-data (0.50) ... Setting up libdebhelper-perl (13.3.4) ... Setting up libbrotli1:armhf (1.0.9-2+b2) ... Setting up libnghttp2-14:armhf (1.43.0-1) ... Setting up libmagic1:armhf (1:5.39-3) ... Setting up gettext-base (0.21-4) ... Setting up file (1:5.39-3) ... Setting up libcap2:armhf (1:2.44-1) ... Setting up libsasl2-modules-db:armhf (2.1.27+dfsg-2.1) ... Setting up liberror-perl (0.17029-1) ... Setting up autotools-dev (20180224.1+nmu1) ... Setting up librtmp1:armhf (2.4+20151223.gitfa8646d.1-2+b2) ... Setting up libsigsegv2:armhf (2.13-1) ... Setting up autopoint (0.21-4) ... Setting up libsasl2-2:armhf (2.1.27+dfsg-2.1) ... Setting up sensible-utils (0.0.14) ... Setting up libuchardet0:armhf (0.0.7-1) ... Setting up libmpdec3:armhf (2.5.1-1) ... Setting up libsub-override-perl (0.09-2) ... Setting up git-man (1:2.30.2-1) ... Setting up libssh2-1:armhf (1.9.0-2) ... Setting up sgml-base (1.30) ... Setting up zsh (5.8-6+b1) ... Setting up libelf1:armhf (0.183-1) ... Setting up readline-common (8.1-1) ... Setting up libxml2:armhf (2.9.10+dfsg-6.7) ... Setting up libfile-stripnondeterminism-perl (1.12.0-1) ... Setting up gettext (0.21-4) ... Setting up libtool (2.4.6-15) ... Setting up libreadline8:armhf (8.1-1) ... Setting up libldap-2.4-2:armhf (2.4.57+dfsg-3) ... Setting up m4 (1.4.18-5) ... Setting up libcurl3-gnutls:armhf (7.74.0-1.3+b1) ... Setting up intltool-debian (0.35.0+20060710.5) ... Setting up ucf (3.0043) ... Setting up git (1:2.30.2-1) ... Setting up autoconf (2.69-14) ... Setting up dh-strip-nondeterminism (1.12.0-1) ... Setting up dwz (0.13+20210201-1) ... Setting up groff-base (1.22.4-6) ... Setting up xml-core (0.18+nmu1) ... Setting up libpython3.9-stdlib:armhf (3.9.2-1) ... Setting up libpython3-stdlib:armhf (3.9.2-3) ... Setting up automake (1:1.16.3-2) ... update-alternatives: using /usr/bin/automake-1.16 to provide /usr/bin/automake (automake) in auto mode Setting up po-debconf (1.0.21+nmu1) ... Setting up man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. Setting up dh-autoreconf (20) ... Setting up python3.9 (3.9.2-1) ... Setting up debhelper (13.3.4) ... Setting up python3 (3.9.2-3) ... Setting up python3-six (1.16.0-1) ... Setting up python3-roman (2.0.0-5) ... Setting up python3-pyparsing (2.4.7-1) ... Setting up python3-dateutil (2.8.1-5) ... Setting up lsb-release (11.1.0) ... Setting up python3-lib2to3 (3.9.2-1) ... Setting up python3-pkg-resources (52.0.0-4) ... Setting up python3-distutils (3.9.2-1) ... Setting up dh-python (4.20201102+nmu1) ... Setting up python3-setuptools (52.0.0-4) ... Setting up python3-distro (1.5.0-1) ... Setting up mercurial-common (5.6.1-4) ... Setting up python3-pbr (5.5.0-2) ... Setting up python3-all (3.9.2-3) ... Setting up python3-yaml (5.3.1-5) ... Setting up python3-mock (4.0.3-1) ... Setting up python3-vcstools (0.1.42-3) ... Setting up mercurial (5.6.1-4) ... Creating config file /etc/mercurial/hgrc.d/hgext.rc with new version Setting up python3-wstool (0.1.18-2) ... Processing triggers for libc-bin (2.31-12) ... Processing triggers for sgml-base (1.30) ... Setting up docutils-common (0.16+dfsg-4) ... Processing triggers for sgml-base (1.30) ... Setting up python3-docutils (0.16+dfsg-4) ... update-alternatives: using /usr/share/docutils/scripts/python3/rst-buildhtml to provide /usr/bin/rst-buildhtml (rst-buildhtml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html to provide /usr/bin/rst2html (rst2html) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html4 to provide /usr/bin/rst2html4 (rst2html4) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2html5 to provide /usr/bin/rst2html5 (rst2html5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2latex to provide /usr/bin/rst2latex (rst2latex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2man to provide /usr/bin/rst2man (rst2man) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt to provide /usr/bin/rst2odt (rst2odt) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2odt_prepstyles to provide /usr/bin/rst2odt_prepstyles (rst2odt_prepstyles) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2pseudoxml to provide /usr/bin/rst2pseudoxml (rst2pseudoxml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2s5 to provide /usr/bin/rst2s5 (rst2s5) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xetex to provide /usr/bin/rst2xetex (rst2xetex) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rst2xml to provide /usr/bin/rst2xml (rst2xml) in auto mode update-alternatives: using /usr/share/docutils/scripts/python3/rstpep2html to provide /usr/bin/rstpep2html (rstpep2html) in auto mode Setting up python3-catkin-pkg (0.4.23-1) ... Setting up python3-rospkg (1.2.9-1) ... Setting up python3-rosdistro (0.8.3-1) ... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... Building tag database... -> Finished parsing the build-deps Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libfile-find-rule-perl libnumber-compare-perl libtext-glob-perl The following NEW packages will be installed: libfile-find-rule-perl libnumber-compare-perl libtext-glob-perl usrmerge 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 59.5 kB of archives. After this operation, 157 kB of additional disk space will be used. Get:1 http://deb.debian.org/debian bullseye/main armhf libnumber-compare-perl all 0.03-1.1 [6956 B] Get:2 http://deb.debian.org/debian bullseye/main armhf libtext-glob-perl all 0.11-1 [8888 B] Get:3 http://deb.debian.org/debian bullseye/main armhf libfile-find-rule-perl all 0.34-1 [30.6 kB] Get:4 http://deb.debian.org/debian bullseye/main armhf usrmerge all 25 [13.0 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 59.5 kB in 0s (253 kB/s) Selecting previously unselected package libnumber-compare-perl. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 26429 files and directories currently installed.) Preparing to unpack .../libnumber-compare-perl_0.03-1.1_all.deb ... Unpacking libnumber-compare-perl (0.03-1.1) ... Selecting previously unselected package libtext-glob-perl. Preparing to unpack .../libtext-glob-perl_0.11-1_all.deb ... Unpacking libtext-glob-perl (0.11-1) ... Selecting previously unselected package libfile-find-rule-perl. Preparing to unpack .../libfile-find-rule-perl_0.34-1_all.deb ... Unpacking libfile-find-rule-perl (0.34-1) ... Selecting previously unselected package usrmerge. Preparing to unpack .../archives/usrmerge_25_all.deb ... Unpacking usrmerge (25) ... Setting up libtext-glob-perl (0.11-1) ... Setting up libnumber-compare-perl (0.03-1.1) ... Setting up libfile-find-rule-perl (0.34-1) ... Setting up usrmerge (25) ... The system has been successfully converted. Processing triggers for man-db (2.9.4-2) ... Not building database; man-db/auto-update is not 'true'. I: Building the package hostname: Name or service not known I: Running cd /build/ros-rosinstall-0.7.8/ && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-buildpackage -us -uc -b && env PATH="/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/i/capture/the/path" HOME="/nonexistent/second-build" dpkg-genchanges -S > ../ros-rosinstall_0.7.8-4_source.changes dpkg-buildpackage: info: source package ros-rosinstall dpkg-buildpackage: info: source version 0.7.8-4 dpkg-buildpackage: info: source distribution unstable dpkg-buildpackage: info: source changed by Jochen Sprickerhof dpkg-source --before-build . dpkg-buildpackage: info: host architecture armhf debian/rules clean dh clean --with python3 --buildsystem=pybuild dh_auto_clean -O--buildsystem=pybuild I: pybuild base:232: python3.9 setup.py clean /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses import imp running clean removing '/build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build' (and everything under it) 'build/bdist.linux-armhf' does not exist -- can't clean it 'build/scripts-3.9' does not exist -- can't clean it dh_autoreconf_clean -O--buildsystem=pybuild dh_clean -O--buildsystem=pybuild debian/rules binary dh binary --with python3 --buildsystem=pybuild dh_update_autotools_config -O--buildsystem=pybuild dh_autoreconf -O--buildsystem=pybuild dh_auto_configure -O--buildsystem=pybuild I: pybuild base:232: python3.9 setup.py config /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses import imp running config dh_auto_build -O--buildsystem=pybuild I: pybuild base:232: /usr/bin/python3 setup.py build /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses import imp running build running build_py creating /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/distro_locate.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/locate.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/__init__.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/setupfiles.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/helpers.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/rosws_stacks_cli.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/rosinstall_cli.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/simple_checkout.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/rosinstall_cmd.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/rosws_cli.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall copying src/rosinstall/__version__.py -> /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall running build_scripts creating build creating build/scripts-3.9 copying and adjusting scripts/rosinstall -> build/scripts-3.9 copying and adjusting scripts/roslocate -> build/scripts-3.9 copying and adjusting scripts/rosws -> build/scripts-3.9 copying and adjusting scripts/rosco -> build/scripts-3.9 changing mode of build/scripts-3.9/rosinstall from 644 to 755 changing mode of build/scripts-3.9/roslocate from 644 to 755 changing mode of build/scripts-3.9/rosws from 644 to 755 changing mode of build/scripts-3.9/rosco from 644 to 755 dh_auto_test -O--buildsystem=pybuild I: pybuild base:232: cd /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build; python3.9 -m unittest discover -v test_get_manifest_current (test.local.test_locate.LocateTest) ... ok test_get_manifest_groovy (test.local.test_locate.LocateTest) ... ok test_get_with_branches (test.local.test_locate.LocateTest) ... ok test_get_with_rosinstall (test.local.test_locate.LocateTest) ... ok test_getters (test.local.test_locate.LocateTest) ... ok test_getters_empty (test.local.test_locate.LocateTest) ... Warning: No specific branch data for branch "devel" found, falling back on default checkout Warning: No specific branch data for branch "release" found, falling back on default checkout ok test_getters_invalid (test.local.test_locate.LocateTest) ... Warning: No specific branch data for branch "devel" found, falling back on default checkout ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpu7ojp182/ros/.git/ [master (root-commit) aa96a55] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpu7ojp182/gitrepo/.git/ [master (root-commit) ef7a873] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_cmd_generate_ros_files_build (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... Using ROS_ROOT: /tmp/tmpu7ojp182/local.rosinstall Writing /tmp/tmpu7ojp182/ws2b/.rosinstall Cloning into '/tmp/tmpu7ojp182/ws2b/ros_comm'... done. Cloning into '/tmp/tmpu7ojp182/ws2b/ros'... done. sto aggiornando al branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved ok test_cmd_generate_ros_files_catkin (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... ok test_cmd_generate_ros_files_catkinpp (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... ok test_cmd_generate_ros_files_simple (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... ok test_cmd_generate_ros_files_vcs (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... ok test_cmd_init (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... [ros_comm] Fetching /tmp/tmpu7ojp182/gitrepo (version None) to /tmp/tmpu7ojp182/ws2b/ros_comm [ros_comm] Done. [ros] Fetching /tmp/tmpu7ojp182/ros (version None) to /tmp/tmpu7ojp182/ws2b/ros [ros] Done. [hgrepo] Fetching /tmp/tmpu7ojp182/hgrepo (version None) to /tmp/tmpu7ojp182/ws2b/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws2b rosinstall update complete. Type 'source /tmp/tmpu7ojp182/ws2b/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws2 Using ROS_ROOT: /tmp/tmpu7ojp182/ros Writing /tmp/tmpu7ojp182/ws5/.rosinstall :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. ok test_cmd_init_catkin (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws5 rosinstall update complete. Type 'source /tmp/tmpu7ojp182/ws5/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Merge caused no change, no new elements found Using ROS_ROOT: /tmp/tmpu7ojp182/ros Writing /tmp/tmpu7ojp182/ws6/.rosinstall ok test_cmd_init_catkin2 (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... rosinstall update complete. Using ROS_ROOT: /tmp/tmpu7ojp182/ros Writing /tmp/tmpu7ojp182/ws7/.rosinstall ok test_cmd_init_catkinpp (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... rosinstall update complete. Using ROS_ROOT: /tmp/tmpu7ojp182/ros Writing /tmp/tmpu7ojp182/ws8/.rosinstall ok test_cmd_init_main (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... rosinstall update complete. rosws is a command to manipulate ROS workspaces. rosws replaces its predecessor rosinstall. Official usage: rosws CMD [ARGS] [OPTIONS] rosws will try to infer install path from context Type 'rosws help' for usage. help provide help for commands init set up a directory as workspace set add or changes one entry from your workspace config merge merges your workspace with another config set remove (rm) remove an entry from your workspace config, without deleting files scrape interactively add all found unmanaged VCS subfolders to workspace update (up) update or check out some of your config elements info Overview of some entries export export a snapshot of the workspace status (st) print the change status of files in some SCM controlled entries diff (di) print a diff over some SCM controlled entries foreach run shell command in given entries regenerate create ROS workspace specific setup files Writing /tmp/tmpu7ojp182/ws11/.rosinstall (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws11 rosinstall update complete. Type 'source /tmp/tmpu7ojp182/ws11/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells workspace: /tmp/tmpu7ojp182/ws11 ROS_ROOT: None workspace: /tmp/tmpu7ojp182/ws11 ROS_ROOT: None workspace: /tmp/tmpu7ojp182/ws11 ROS_ROOT: None ok test_cmd_init_makedir (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... Using ROS_ROOT: /tmp/tmpu7ojp182/ros Writing /tmp/tmpu7ojp182/ws9/.rosinstall ok test_cmd_init_no_ros (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws9 rosinstall update complete. Type 'source /tmp/tmpu7ojp182/ws9/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Writing /tmp/tmpu7ojp182/ws10/.rosinstall (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws10 rosinstall update complete. Type 'source /tmp/tmpu7ojp182/ws10/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Writing /tmp/tmpu7ojp182/ws10/.rosinstall ok test_cmd_remove (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws10 rosinstall update complete. Type 'source /tmp/tmpu7ojp182/ws10/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpu7ojp182/ros Writing /tmp/tmpu7ojp182/ws12/.rosinstall ok test_init_parallel (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws12 rosinstall update complete. Type 'source /tmp/tmpu7ojp182/ws12/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Performing actions: Add new elements: /tmp/tmpu7ojp182/gitrepo Config changed, maybe you need run rosws update to update SCM entries. Overwriting /tmp/tmpu7ojp182/ws12/.rosinstall update complete. Performing actions: Add new elements: /tmp/tmpu7ojp182/hgrepo Config changed, maybe you need run rosws update to update SCM entries. Overwriting /tmp/tmpu7ojp182/ws12/.rosinstall update complete. Overwriting /tmp/tmpu7ojp182/ws12/.rosinstall Removed entries ['/tmp/tmpu7ojp182/gitrepo'] Using ROS_ROOT: /tmp/tmpu7ojp182/simple.rosinstall Writing /tmp/tmpu7ojp182/ws13a/.rosinstall Cloning into '/tmp/tmpu7ojp182/ws13a/ros'... Cloning into '/tmp/tmpu7ojp182/ws13a/gitrepo'... done. done. [ros] Fetching /tmp/tmpu7ojp182/ros (version None) to /tmp/tmpu7ojp182/ws13a/ros [ros] Done. [gitrepo] Fetching /tmp/tmpu7ojp182/gitrepo (version None) to /tmp/tmpu7ojp182/ws13a/gitrepo [gitrepo] Done. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. ok test_setup_sh (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... [ros,gitrepo] still active (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws13a rosinstall update complete. Type 'source /tmp/tmpu7ojp182/ws13a/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpu7ojp182/simple.rosinstall Writing /tmp/tmpu7ojp182/ws13/.rosinstall Cloning into '/tmp/tmpu7ojp182/ws13/ros'... done. Cloning into '/tmp/tmpu7ojp182/ws13/gitrepo'... done. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. ok test_setup_sh_relother (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... [ros] Fetching /tmp/tmpu7ojp182/ros (version None) to /tmp/tmpu7ojp182/ws13/ros [ros] Done. [gitrepo] Fetching /tmp/tmpu7ojp182/gitrepo (version None) to /tmp/tmpu7ojp182/ws13/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws13 rosinstall update complete. Type 'source /tmp/tmpu7ojp182/ws13/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpu7ojp182/simple_rel2.rosinstall Writing /tmp/tmpu7ojp182/ws15/.rosinstall Cloning into '/tmp/tmpu7ojp182/ws15/ros'... done. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. ok test_setup_sh_relros (test.local.test_ros_cli.RosinstallCommandLineGenerationTest) ... [ros] Fetching /tmp/tmpu7ojp182/ros (version None) to /tmp/tmpu7ojp182/ws15/ros [ros] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws15 rosinstall update complete. Type 'source /tmp/tmpu7ojp182/ws15/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmpu7ojp182/simple_rel.rosinstall Writing /tmp/tmpu7ojp182/ws14/.rosinstall Cloning into '/tmp/tmpu7ojp182/ws14/ros'... done. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmp9jfzr0qi/ros/.git/ [master (root-commit) 3f33ee3] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmp9jfzr0qi/gitrepo/.git/ [master (root-commit) a06fbfd] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_require_bootstrap (test.local.test_ros_cli.RosinstallCommandlineTest) ... ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmp_7lgog2t/ros/.git/ [master (root-commit) 741c029] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmp_7lgog2t/gitrepo/.git/ [master (root-commit) 128682f] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_Rosinstall_ros_with_folder (test.local.test_rosinstall.RosinstallCommandlineOverlays) Use a folder as a remote rosinstall location ... [ros] Fetching /tmp/tmpu7ojp182/ros (version None) to /tmp/tmpu7ojp182/ws14/ros [ros] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu7ojp182/ws14 rosinstall update complete. Type 'source /tmp/tmpu7ojp182/ws14/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpz4e8md04 from specifications in rosinstall files /tmp/tmp_7lgog2t/simple.rosinstall (Over-)Writing /tmp/tmpz4e8md04/.rosinstall Cloning into '/tmp/tmpz4e8md04/ros'... done. Cloning into '/tmp/tmpz4e8md04/gitrepo'... done. [ros] Fetching /tmp/tmp_7lgog2t/ros (version None) to /tmp/tmpz4e8md04/ros [ros] Done. [gitrepo] Fetching /tmp/tmp_7lgog2t/gitrepo (version None) to /tmp/tmpz4e8md04/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpz4e8md04 rosinstall update complete. Now, type 'source /tmp/tmpz4e8md04/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmp6az38uln from specifications in rosinstall files /tmp/tmpz4e8md04 (Over-)Writing /tmp/tmp6az38uln/.rosinstall ok test_Rosinstall_rosinstall_file_input (test.local.test_rosinstall.RosinstallCommandlineOverlays) uses base rosinstall with ros and git repo ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp6az38uln rosinstall update complete. Now, type 'source /tmp/tmp6az38uln/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpph2f0xaf from specifications in rosinstall files /tmp/tmp_7lgog2t/simple.rosinstall (Over-)Writing /tmp/tmpph2f0xaf/.rosinstall Cloning into '/tmp/tmpph2f0xaf/ros'... done. Cloning into '/tmp/tmpph2f0xaf/gitrepo'... done. [ros] Fetching /tmp/tmp_7lgog2t/ros (version None) to /tmp/tmpph2f0xaf/ros [ros] Done. [gitrepo] Fetching /tmp/tmp_7lgog2t/gitrepo (version None) to /tmp/tmpph2f0xaf/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpph2f0xaf rosinstall update complete. Now, type 'source /tmp/tmpph2f0xaf/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmptfy22jqo from specifications in rosinstall files /tmp/tmpph2f0xaf (Over-)Writing /tmp/tmptfy22jqo/.rosinstall /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/test/local/test_rosinstall.py:68: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. yamlsrc = yaml.load(stream) ok test_Rosinstall_rosinstall_file_input_add (test.local.test_rosinstall.RosinstallCommandlineOverlays) uses base ros folders and adds a stack ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmptfy22jqo rosinstall update complete. Now, type 'source /tmp/tmptfy22jqo/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmplq9cyin8 from specifications in rosinstall files /tmp/tmp_7lgog2t/simple.rosinstall (Over-)Writing /tmp/tmplq9cyin8/.rosinstall Cloning into '/tmp/tmplq9cyin8/ros'... done. Cloning into '/tmp/tmplq9cyin8/gitrepo'... done. [ros] Fetching /tmp/tmp_7lgog2t/ros (version None) to /tmp/tmplq9cyin8/ros [ros] Done. [gitrepo] Fetching /tmp/tmp_7lgog2t/gitrepo (version None) to /tmp/tmplq9cyin8/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmplq9cyin8 rosinstall update complete. Now, type 'source /tmp/tmplq9cyin8/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells !!!!! Warning: Not recursing into other config folder /tmp/tmplq9cyin8 containing file .rosinstall rosinstall operating on /tmp/tmpfzsdg0mc from specifications in rosinstall files /tmp/tmp_7lgog2t/ros, /tmp/tmp_7lgog2t/local2.rosinstall (Over-)Writing /tmp/tmpfzsdg0mc/.rosinstall sto aggiornando al branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/test/local/test_rosinstall.py:101: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. yamlsrc = yaml.load(stream) ok test_Rosinstall_rosinstall_file_input_ros_only (test.local.test_rosinstall.RosinstallCommandlineOverlays) uses base ros folder ... [gitrepo] Fetching /tmp/tmp_7lgog2t/hgrepo (version None) to /tmp/tmpfzsdg0mc/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpfzsdg0mc rosinstall update complete. Now, type 'source /tmp/tmpfzsdg0mc/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpyqm2ym93 from specifications in rosinstall files /tmp/tmp_7lgog2t/simple.rosinstall (Over-)Writing /tmp/tmpyqm2ym93/.rosinstall Cloning into '/tmp/tmpyqm2ym93/ros'... done. Cloning into '/tmp/tmpyqm2ym93/gitrepo'... done. [ros] Fetching /tmp/tmp_7lgog2t/ros (version None) to /tmp/tmpyqm2ym93/ros [ros] Done. [gitrepo] Fetching /tmp/tmp_7lgog2t/gitrepo (version None) to /tmp/tmpyqm2ym93/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpyqm2ym93 rosinstall update complete. Now, type 'source /tmp/tmpyqm2ym93/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells !!!!! Warning: Not recursing into other config folder /tmp/tmpyqm2ym93 containing file .rosinstall rosinstall operating on /tmp/tmp_k9dh5q8 from specifications in rosinstall files /tmp/tmp_7lgog2t/ros, /tmp/tmp_7lgog2t/local.rosinstall (Over-)Writing /tmp/tmp_k9dh5q8/.rosinstall /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/test/local/test_rosinstall.py:84: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. yamlsrc = yaml.load(stream) ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpqkxbsybw/ros/.git/ [master (root-commit) 7d3f4ce] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpqkxbsybw/gitrepo/.git/ [master (root-commit) 1cb4ab6] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_Rosinstall_ros_with_folder_and_setupfile (test.local.test_rosinstall.RosinstallCommandlineOverlaysWithSetup) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp_k9dh5q8 rosinstall update complete. Now, type 'source /tmp/tmp_k9dh5q8/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpnqgvw_yp from specifications in rosinstall files /tmp/tmpqkxbsybw/simple_fuerte.rosinstall (Over-)Writing /tmp/tmpnqgvw_yp/.rosinstall Cloning into '/tmp/tmpnqgvw_yp/ros'... done. sto aggiornando al branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpqkxbsybw/ros (version None) to /tmp/tmpnqgvw_yp/ros [ros] Done. [hgrepo] Fetching /tmp/tmpqkxbsybw/hgrepo (version None) to /tmp/tmpnqgvw_yp/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpnqgvw_yp rosinstall update complete. Now, type 'source /tmp/tmpnqgvw_yp/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpgi1lxf5q from specifications in rosinstall files /tmp/tmpnqgvw_yp (Over-)Writing /tmp/tmpgi1lxf5q/.rosinstall /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/test/local/test_rosinstall.py:157: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. yamlsrc = yaml.load(stream) ok test_Rosinstall_rosinstall_file_input_with_setupfile (test.local.test_rosinstall.RosinstallCommandlineOverlaysWithSetup) ... (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpgi1lxf5q rosinstall update complete. Now, type 'source /tmp/tmpgi1lxf5q/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells rosinstall operating on /tmp/tmpu2sgbrjj from specifications in rosinstall files /tmp/tmpqkxbsybw/simple_fuerte.rosinstall (Over-)Writing /tmp/tmpu2sgbrjj/.rosinstall Cloning into '/tmp/tmpu2sgbrjj/ros'... done. sto aggiornando al branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmpqkxbsybw/ros (version None) to /tmp/tmpu2sgbrjj/ros [ros] Done. [hgrepo] Fetching /tmp/tmpqkxbsybw/hgrepo (version None) to /tmp/tmpu2sgbrjj/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmpu2sgbrjj rosinstall update complete. Now, type 'source /tmp/tmpu2sgbrjj/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells !!!!! Warning: Not recursing into other config folder /tmp/tmpu2sgbrjj containing file .rosinstall rosinstall operating on /tmp/tmp2yn_3vwo from specifications in rosinstall files /tmp/tmpqkxbsybw/ros, /tmp/tmpqkxbsybw/local.rosinstall (Over-)Writing /tmp/tmp2yn_3vwo/.rosinstall sto aggiornando al branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/test/local/test_rosinstall.py:146: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. yamlsrc = yaml.load(stream) ok test_prereq (test.local.test_rosinstall.RosinstallLocalDistro) ... ok test_get_ros_package_path (test.local.test_rosinstall_standalone_functions.FunctionsTest) ... ok test_get_ros_stack_path (test.local.test_rosinstall_standalone_functions.FunctionsTest) ... ok test_is_path_ros (test.local.test_rosinstall_standalone_functions.FunctionsTest) ... ok test_is_path_stack (test.local.test_rosinstall_standalone_functions.FunctionsTest) ... ok test_is_ros_in_setupfile (test.local.test_rosinstall_standalone_functions.FunctionsTest) ... ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmp9kvuyejv/ros/.git/ [master (root-commit) 10f20a7] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmp9kvuyejv/gitrepo/.git/ [master (root-commit) bbf148d] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_info_only (test.local.test_rosws.RosWsTest) ... [hgrepo] Fetching /tmp/tmpqkxbsybw/hgrepo (version None) to /tmp/tmp2yn_3vwo/hgrepo [hgrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp2yn_3vwo rosinstall update complete. Now, type 'source /tmp/tmp2yn_3vwo/setup.bash' to set up your environment. Add that to the bottom of your ~/.bashrc to set it up every time. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Using ROS_ROOT: /tmp/tmp9kvuyejv/simple.rosinstall Writing /tmp/tmp9kvuyejv/ws7/.rosinstall Cloning into '/tmp/tmp9kvuyejv/ws7/ros'... done. Cloning into '/tmp/tmp9kvuyejv/ws7/gitrepo'... done. ok test_init (test.local.test_rosws.RosWsTest) ... Usage: rosws init [TARGET_PATH [SOURCE_PATH]]? python3.9 -m unittest: error: Too many arguments Cloning into '/tmp/tmp9kvuyejv/ws1/ros'... done. Cloning into '/tmp/tmp9kvuyejv/ws1/gitrepo'... done. [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_init_parallel (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmp9kvuyejv/ws1d/gitrepo'... Cloning into '/tmp/tmp9kvuyejv/ws1d/ros'... done. done. ok test_init_pwd (test.local.test_rosws.RosWsTest) ... [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_merge (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmp9kvuyejv/ws2/ros'... done. Cloning into '/tmp/tmp9kvuyejv/ws2/gitrepo'... done. [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells sto aggiornando al branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_remove (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmp9kvuyejv/ws3/ros'... done. Cloning into '/tmp/tmp9kvuyejv/ws3/gitrepo'... done. [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells sto aggiornando al branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_set_add_plain (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmp9kvuyejv/ws5/ros'... done. Cloning into '/tmp/tmp9kvuyejv/ws5/gitrepo'... done. [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_set_add_scm (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmp9kvuyejv/ws6/ros'... done. Cloning into '/tmp/tmp9kvuyejv/ws6/gitrepo'... done. [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells sto aggiornando al branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells sto facendo pull da /tmp/tmp9kvuyejv/hgrepo sto cercando modifiche nessuna modifica trovata 0 files updated, 0 files merged, 1 files removed, 0 files unresolved [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells sto facendo pull da /tmp/tmp9kvuyejv/hgrepo sto cercando modifiche nessuna modifica trovata 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok test_set_add_scm_change_localname (test.local.test_rosws.RosWsTest) ... [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells Usage: rosws set [localname] [[SCM-URI] --(detached|svn|hg|git|bzr) [--version=VERSION]?]? python3.9 -m unittest: error: Cannot decide which one you want to add: /tmp/tmp9kvuyejv/gitrepo /tmp/tmp9kvuyejv/ws8/gitrepo ok test_set_detached (test.local.test_rosws.RosWsTest) ... Cloning into '/tmp/tmp9kvuyejv/ws4/ros'... done. Cloning into '/tmp/tmp9kvuyejv/ws4/gitrepo'... done. [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells sto aggiornando al branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells ok hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpwpf67h4t/ros/.git/ [master (root-commit) 61a2568] initial Author: Your Name 4 files changed, 4 insertions(+) create mode 100755 bin/rosmake create mode 100755 bin/rospack create mode 100644 setup.sh create mode 100644 stack.xml hint: Using 'master' as the name for the initial branch. This default branch name hint: is subject to change. To configure the initial branch name to use in all hint: of your new repositories, which will suppress this warning, call: hint: hint: git config --global init.defaultBranch hint: hint: Names commonly chosen instead of 'master' are 'main', 'trunk' and hint: 'development'. The just-created branch can be renamed via this command: hint: hint: git branch -m Initialized empty Git repository in /tmp/tmpwpf67h4t/gitrepo/.git/ [master (root-commit) 6a12646] initial Author: Your Name 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 gitfixed.txt test_gen_setup (test.local.test_setupfiles.GenerateTest) ... ok test_gen_setup_bash (test.local.test_setupfiles.GenerateTest) ... ok test_gen_setupsh (test.local.test_setupfiles.GenerateTest) ... ok test_source_setup_sh (test.local.test_setupfiles.GenerateTest) ... There is no file at /tmp/tmpwpf67h4t/workspacetest/.rosinstall Could not parse .rosinstall file warn: no such file : ERROR basename: missing operand Try 'basename --help' for more information. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. /usr/lib/python3.9/subprocess.py:1052: ResourceWarning: subprocess 9251 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback ok test_source_setup_sh_chain (test.local.test_setupfiles.GenerateTest) Tests chaining of workspaces, which is fragile because ... :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. /usr/lib/python3.9/subprocess.py:1052: ResourceWarning: subprocess 9277 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. :21: YAMLLoadWarning: calling yaml.load() without Loader=... is deprecated, as the default Loader is unsafe. Please read https://msg.pyyaml.org/load for full details. /usr/lib/python3.9/subprocess.py:1052: ResourceWarning: subprocess 9404 is still running _warn("subprocess %s is still running" % self.pid, ResourceWarning: Enable tracemalloc to get the object allocation traceback ok test_gen_python_code (test.local.test_setupfiles.Genfiletest) ... ok test_gen_python_code_python3 (test.local.test_setupfiles.Genfiletest) ... ok ---------------------------------------------------------------------- Ran 54 tests in 517.434s OK [ros] Fetching /tmp/tmp9kvuyejv/ros (version None) to /tmp/tmp9kvuyejv/ws7/ros [ros] Done. [gitrepo] Fetching /tmp/tmp9kvuyejv/gitrepo (version None) to /tmp/tmp9kvuyejv/ws7/gitrepo [gitrepo] Done. (Over-)Writing setup.sh, setup.bash, and setup.zsh in /tmp/tmp9kvuyejv/ws7 rosinstall update complete. Type 'source /tmp/tmp9kvuyejv/ws7/setup.bash' to change into this environment. Add that source command to the bottom of your ~/.bashrc to set it up every time you log in. If you are not using bash please see http://www.ros.org/wiki/rosinstall/NonBashShells create-stamp debian/debhelper-build-stamp dh_testroot -O--buildsystem=pybuild dh_prep -O--buildsystem=pybuild dh_auto_install -O--buildsystem=pybuild I: pybuild base:232: /usr/bin/python3 setup.py install --root /build/ros-rosinstall-0.7.8/debian/python3-rosinstall /build/ros-rosinstall-0.7.8/setup.py:3: DeprecationWarning: the imp module is deprecated in favour of importlib; see the module's documentation for alternative uses import imp running install running build running build_py running build_scripts running install_lib creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9 creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/distro_locate.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/__init__.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/helpers.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/__version__.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/locate.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/setupfiles.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/rosinstall_cli.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/rosinstall_cmd.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__pycache__/rosws_cli.cpython-39.pyc -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__pycache__ copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/locate.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__init__.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/setupfiles.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/helpers.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/rosws_stacks_cli.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/rosinstall_cli.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/simple_checkout.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/rosinstall_cmd.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/rosws_cli.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall copying /build/ros-rosinstall-0.7.8/.pybuild/cpython3_3.9/build/rosinstall/__version__.py -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/distro_locate.py to distro_locate.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/locate.py to locate.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__init__.py to __init__.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/setupfiles.py to setupfiles.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/helpers.py to helpers.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/rosws_stacks_cli.py to rosws_stacks_cli.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/rosinstall_cli.py to rosinstall_cli.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/simple_checkout.py to simple_checkout.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/rosinstall_cmd.py to rosinstall_cmd.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/rosws_cli.py to rosws_cli.cpython-39.pyc byte-compiling /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall/__version__.py to __version__.cpython-39.pyc running install_egg_info running egg_info creating src/rosinstall.egg-info writing src/rosinstall.egg-info/PKG-INFO writing dependency_links to src/rosinstall.egg-info/dependency_links.txt writing requirements to src/rosinstall.egg-info/requires.txt writing top-level names to src/rosinstall.egg-info/top_level.txt writing manifest file 'src/rosinstall.egg-info/SOURCES.txt' reading manifest file 'src/rosinstall.egg-info/SOURCES.txt' writing manifest file 'src/rosinstall.egg-info/SOURCES.txt' Copying src/rosinstall.egg-info to /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/lib/python3.9/dist-packages/rosinstall-0.7.8.egg-info Skipping SOURCES.txt running install_scripts creating /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.9/rosco -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.9/rosws -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.9/roslocate -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin copying build/scripts-3.9/rosinstall -> /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/rosco to 755 changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/rosws to 755 changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/roslocate to 755 changing mode of /build/ros-rosinstall-0.7.8/debian/python3-rosinstall/usr/bin/rosinstall to 755 dh_installdocs -O--buildsystem=pybuild dh_installchangelogs -O--buildsystem=pybuild dh_python3 -O--buildsystem=pybuild dh_installinit -O--buildsystem=pybuild dh_installsystemduser -O--buildsystem=pybuild dh_perl -O--buildsystem=pybuild dh_link -O--buildsystem=pybuild dh_strip_nondeterminism -O--buildsystem=pybuild dh_compress -O--buildsystem=pybuild dh_fixperms -O--buildsystem=pybuild dh_missing -O--buildsystem=pybuild dh_installdeb -O--buildsystem=pybuild dh_gencontrol -O--buildsystem=pybuild dh_md5sums -O--buildsystem=pybuild dh_builddeb -O--buildsystem=pybuild dpkg-deb: building package 'python3-rosinstall' in '../python3-rosinstall_0.7.8-4_all.deb'. dpkg-genbuildinfo --build=binary dpkg-genchanges --build=binary >../ros-rosinstall_0.7.8-4_armhf.changes dpkg-genchanges: info: binary-only upload (no source code included) dpkg-source --after-build . dpkg-buildpackage: info: binary-only upload (no source included) dpkg-genchanges: info: not including original source code in upload I: copying local configuration I: user script /srv/workspace/pbuilder/26627/tmp/hooks/B01_cleanup starting I: user script /srv/workspace/pbuilder/26627/tmp/hooks/B01_cleanup finished I: unmounting dev/ptmx filesystem I: unmounting dev/pts filesystem I: unmounting dev/shm filesystem I: unmounting proc filesystem I: unmounting sys filesystem I: cleaning the build env I: removing directory /srv/workspace/pbuilder/26627 and its subdirectories I: Current time: Sat Jul 24 21:30:28 +14 2021 I: pbuilder-time-stamp: 1627111828